![]() |
Light activated lamppost switch
We have a CYV in Hadley & our front lamppost light activated switch seems to have lasted only 6 months. ACE Hardware mentioned it could be todo with lightning & surges. We don’t want to have to keep replacing the switch every time we visit. Any suggestions? Thank you.
|
Quote:
|
We put in a whole house surge protector via SECO that might help. Have not heard that these are victims of lightning before
|
Quote:
|
you may have had a defective switch initially installed....swop it out with a high end manufacturer's switch
the little light sensor on our lamppost didn't last 3 months before we had to have that swopped out |
Quote:
|
Quote:
We had a whole house surge protector put in by Seco and have individual surge protectors on high value stuff. If we have a surge on the main power line are you saying we are not protected? What else can we do to protect ourselves? |
Quote:
|
Quote:
|
Quote:
|
go to lows i put one a year ago
|
Quote:
|
A power line surge Protection theoretically will be stopped at meter from going into home.
|
Edit to clarify for the OP:
There are two causes for a defective lamppost light. The light sensor located in the light pole and the Ground Fault Circuit interrupter outlet (GFI or GFCI). Both can fail. The GFI is the same as the one in your bathroom. It is designed to prevent shock/electrocution. Because of this they are sensitive to voltage surges. The light detector can also fail but at a lower tate. GFIs are prone to fail after lightening. Your lamppost GFI is located in your garage. Original post: A whole home surge protector will not prevent the GFI for your lamppost from failing, mine did Don't fix a 20 dollar bad GFI problem with a 350 dollar whole house surge or a 4,000 dollar lightening rod set Just replace or reset the GFI in the garage and move on. Oh I have never seen a GFI outlet with a red reset button. So don't zero in on red. |
I have had the light sensor in lamppost work for two weeks and sometimes 5 years - easy to change and doesn't cost much at Lowes. Ace guys are pretty good, but not experts on anything. No guarantee on how long they will work.
|
Quote:
|
Quote:
|
Actual amount paid for lightning protection system
Quote:
|
The light sensing switch on my lamp post is not connected to a GFI, Over 23 years, I have replaced the switch 3 or 4 times. I found water intrusion caused two switchs to fail. One switch failed after being installed only two weeks. The quality of the switches available at the big box stores is generally poor. They are manufactured in China.
|
Should last years....your choice
|
Photocell issue
Quote:
|
Ace switch defective
I replaced my ace switch with one from Lowe’s because it only lasted 3 months. That was over a year ago.
|
Replace the switch with one from Home Dpot and while you are at it replace the bulbs with LED bulbs - I think you will be very happy with the results
|
My outside lamp post sensor just stopped working won't shut off. Reset the breaker in the garage no luck. Sensor arrived in the mail will replace it this week. Have the whole house surge thru SECO. That took a hit about a year ago had to have it replaced. Glad I had it because all these electronic devices would have sent me to the poor house!
|
Find one Made in USA and not the crap that comes from China. I swear they have ZERO quality contol there!!
|
Quote:
|
At this time I would hire a pro. Everyone is either guessing what your problem is or basing on someone else’s experience without inspecting your lamppost. Hey but that is just me. Why try to fix a problem that someone else had?
|
I have a whole house surge protector which got a test about two weeks ago. We had a lightning strike about 50 feet from our house. Most of the Electronic Equipment survived. The main victims were the LG Dual Oven and one computer that was charging at the time of the strike and the Xfinity Modem.
We learned that there was insurance one level above the one we had that would have covered everything. It wasn't available when we activated the Surge Suppressor Plan. It's a shame because I would have chosen the all-inclusive plan from Duke. Our plan only covers any item that has a motor in it. The better plan is only a few dollars more per month. I never liked that stove anyway. I must say that Duke and their contractor, Advanced Electric of Leesburg have been responsive and have helped us out greatly. We appreciate them. I am grateful it wasn't the house that took the hit. We love this house. The most modest home we've ever owned turned out to be the most comfortable. Go figure. I sure could use a day without having to call them for something, I hope that is today. |
Quote:
|
We have a CYV and the lamp didn't work when we bought.
I went to ACE bought a new light sensor and the lamp worked. We went back north for a period, when we came back, the light wasn't working again! @#$%^%!! I had installed an LED light in the fixture and when I took the bulb out, I noted that the base of the bulb had corroded to the contact at the bottom. I replaced the entire lamp with one I bought on Amazon and it's been working ever since. So while it can be a GFCI circuit breaker or the light sensor, it also can be the socket as well. Also, buy the better light sensor from ACE. They offer the cheapy and the one for a few bucks more. Shrug. If it lasts a couple more years it's worth it. |
Quote:
|
Our “original” lasted 12 years.
|
Doesn't sound right. Replace and see what happens
|
Buy Generac Generator - takes care of the whole house. I have used this on my home in PA and was worth every penny.
|
Quote:
|
There are several’grades’ of lamppost light detectors, get a quality one and be sure to instal it correctly, consider a licensed electrician. I replaced mine and it lasted only a couple of years. Had an electrician replace and he showed me what I had done wrong. If you do opt for whole house lightning rods make sure you use an UL licensed installer. Apparently there are a lot ‘bad’ or unlicensed installers out there.
|
[GFIs used to have RED resets, but don't anymore.
There are two causes for a defective lamppost light. The light sensor located in Th'te light pole and the Ground Fault Circuit interrupter outlet (GFI or GFCI). Both can fail. The GFI is the same as the one in your bathroom. It is designed to prevent shock/electrocution. Because of this they are sensitive to voltage surges. The light detector can also fail but at a lower tate. GFIs are prone to fail after lightening. Your lamppost GFI is located in your garage. Original post: A whole home surge protector will not prevent the GFI for your lamppost from failing, mine did Don't fix a 20 dollar bad GFI problem with a 350 dollar whole house surge or a 4,000 dollar lightening rod set Just replace or reset the GFI in the garage and move on. Oh I have never seen a GFI outlet with a red reset button. So don't zero in on red.[/QUOTE] |
Quote:
|
Quote:
I've replaced close to ten light post sensors between mine and neighbors. Some last a few months and some last a few years. Some of the old ones do not like florescent or LED bulbs and the new ones say they are made to work with them. After replacing mine in my old home several times, I ended up using a screw-in the socket light sensor that was cheaper and easier to change. In the past three years, I have replaced the sensor on this house twice. If it happens again, I will go to the screw in type. |
My house was new last year and warranty had to replace the device that’s light activated in less than 6 months.
|
All times are GMT -5. The time now is 09:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO v2.0.32 (Pro) -
vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.