Talk of The Villages Florida

Talk of The Villages Florida (https://www.talkofthevillages.com/forums/)
-   Contractors and Services (https://www.talkofthevillages.com/forums/contractors-services-91/)
-   -   Electrician recommendation? (https://www.talkofthevillages.com/forums/contractors-services-91/electrician-recommendation-168138/)

jdsl1998 10-27-2015 06:48 AM

Electrician recommendation?
 
Hello, We are in need of an CERTIFIED electrician. We need to have lights put in our ceiling.
1. Replace the lights in the kitchen and dining area
2. When replacing these, move where the fixture located.
3. Our fixture buzzes now so we need more wattage(?) to handle the
lights that are now on a dimmer.
Please let us know who to use or not use.
Thank you,
Deb

Villager Joyce 10-27-2015 07:37 AM

We are happy with Lenhart.

Chief X 10-27-2015 08:14 AM

Lenhart Electrical from Wildwood. Just did a great job for me.

REDCART 10-27-2015 08:27 AM

Lenhart can do everything you need. They moved our DR chandelier 18" last year and we were then able to close up the original hole in the ceiling because they pulled the original wire into the new box.

villagetinker 10-27-2015 08:38 AM

As for your question on the lights, please consider dimmable LED bulbs. We have had these installed for over 2 years and they are great. If you want/need more light, consider the bright white colored LEDS. You can use the CONVENTIONAL LED 60 watt or larger bulbs in the ceiling fixtures with great results, and maybe you will not need to move the fixtures.
NOTE: you will see and can install 'special LED fixtures', IMHO these are not necessary. The conventional LEDs do not have restrictions on how they are mounted, and create much less heat. We used CREE bulbs from Lowes, and I would highly recommend these, but I see now that there are several other manufacturers, including a GE LED (led stick?) that looks very interesting, and they are priced at 3 for $10 which is very attractive.
The original lights in TV are 130 volt incandescent bubs. Operating a 130 volt bulb at 120 volts or slightly less, gives you a bulb that will last a very long time but is DIM, the use of LEDS is the difference between night and day. Also, the loading on your dimmers will be much lower, and the buzzing should stop completely.
Hope this helps.

HoosierPa 01-09-2016 06:13 AM

Victor Scine (352) 427-9299. 30 years experience. Did some work for me. Also has a person who patches and textures ceiling holes. Did a good job

photo1902 01-09-2016 07:06 AM

Another vote for Lenhart!

paulat585 01-14-2016 03:58 PM

Did what you suggested
 
Quote:

Originally Posted by villagetinker (Post 1136256)
As for your question on the lights, please consider dimmable LED bulbs. We have had these installed for over 2 years and they are great. If you want/need more light, consider the bright white colored LEDS. You can use the CONVENTIONAL LED 60 watt or larger bulbs in the ceiling fixtures with great results, and maybe you will not need to move the fixtures.
NOTE: you will see and can install 'special LED fixtures', IMHO these are not necessary. The conventional LEDs do not have restrictions on how they are mounted, and create much less heat. We used CREE bulbs from Lowes, and I would highly recommend these, but I see now that there are several other manufacturers, including a GE LED (led stick?) that looks very interesting, and they are priced at 3 for $10 which is very attractive.
The original lights in TV are 130 volt incandescent bubs. Operating a 130 volt bulb at 120 volts or slightly less, gives you a bulb that will last a very long time but is DIM, the use of LEDS is the difference between night and day. Also, the loading on your dimmers will be much lower, and the buzzing should stop completely.
Hope this helps.

I am mostly a lurker on TOTV. Followed your suggestions and replaced 3 light bulbs today. It makes a world of difference! One question I have: My house is about 25 years old. When I took down the globes, the insulation between the bulbs and the ceiling had disintegrated. I removed it. Do I need to replace the insulation? What I have now is an LED bulb sitting about 1/2 inch from the metal mount on the ceiling. Hope this is clear. Thanks.

villagetinker 01-14-2016 04:40 PM

Quote:

Originally Posted by paulat585 (Post 1171623)
I am mostly a lurker on TOTV. Followed your suggestions and replaced 3 light bulbs today. It makes a world of difference! One question I have: My house is about 25 years old. When I took down the globes, the insulation between the bulbs and the ceiling had disintegrated. I removed it. Do I need to replace the insulation? What I have now is an LED bulb sitting about 1/2 inch from the metal mount on the ceiling. Hope this is clear. Thanks.

Dear lurker,
I am not sure what insulation you are talking about. I have seen additional insulation installed between the wires and the housing. If this is what you are talking about, yes it should be replaced. If you are not comfortable doing this, I remember seeing some discussion able people that would rewire lamps.
Glad you like the LEDs, the difference is amazing.


All times are GMT -5. The time now is 12:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.32 (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.