autumnspring |
10-04-2017 08:52 AM |
Take to cooperative extension
Quote:
Originally Posted by fruitcup
(Post 1457079)
I have three weeping bottlebrush trees that provide a much needed privacy wall for me. Luckily, the hurricane did not cause the trees to snap, but some of the ends are turning brown and the trees are thinning. I heard these trees are susceptible to wind damage, but don't know what to do for the trees to restore them to their fullness.
Any suggestions would be TRULY be appreciated! :sad:
|
I DO NOT CLAIM TO BE AN EXPERT BUT, "bottle brush tree,"
I think that is a graft as the plant is normally a bush.
My suggestion at the top is to take some pictures of the plant and be sure to show the location where it is as well and bring it to the cooperative extension with a sample of the brach you describe as having brown tips.
You might also look it up on the internet. Among other things you will find materials from the cooperative extension. That might save you tinme to go there and more important you will get a researched report by their expert on the bottle brush rather than someone trying to deal with everything.
It is time to play Sherlock Holmes. When, were these plants put in?
You say,"some of the ends are turning brown," are the brown ends on only one plant? Only one branch? If, only one branch, can you simply remove that one branch and cut out the problem? If, so, be sure to clean your cutting tools before and after.
You seem to be focused on the wind. Remember with the hurricane we also had 8-10 inches of rain. Brown tips could simply be over watering combined with poor drainage-our poor soil.
The bottlebrush is a tough plant. BUT, YOU can kill it with too much IMPROPER care. DO NOT FERTILIZE IN NOW-it is naturally slowing down for winter.
|