Talk of The Villages Florida

Talk of The Villages Florida (https://www.talkofthevillages.com/forums/)
-   The Villages, Florida, General Discussion (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/)
-   -   Water in lanai and birdcage (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/water-lanai-birdcage-258858/)

Henryk 03-20-2018 01:50 PM

Water in lanai and birdcage
 
In storms it takes days for water to leak out of my birdcage and lanai. Any simple solutions? Thanks.

photo1902 03-20-2018 01:57 PM

Quote:

Originally Posted by Henryk (Post 1525155)
In storms it takes days for water to leak out of my birdcage and lanai. Any simple solutions? Thanks.

You can have drains installed (a few local companies). In addition, you can unscrew the metal screen frame where it meets the floor, and shim the low spots.

Topspinmo 03-20-2018 02:15 PM

Lanai, mine was puddling in the low spots, I drilled at floor level through the bottom metal rail so it would drain. It already had small hole but I guess rust clogged it up. So I opened it up to drain. If the bird cage has metal rail around the bottom it should be slopped to one side? I would think that's where it's puddling. If it's just too flat to drain looks like sweep job after lot of rain? It would have to be awful bad before I would spend $$$$ breaking concrete laying French drain?

asianthree 03-20-2018 02:29 PM

We have to use a screwdriver every once in awhile to open up the holes that drain the water. They are tiny, and by the bottom of the birdcage. Soon as we open the the area drains.

HiHoSteveO 03-20-2018 02:33 PM

Drain out the water
 
Quote:

Originally Posted by Henryk (Post 1525155)
In storms it takes days for water to leak out of my birdcage and lanai. Any simple solutions? Thanks.


You can have this fixed in 10 minutes from now for free.

Locate where the water collects at its deepest spot.

At the aluminum channel at the bottom, loosen 3-4 screws at that deepest spot at least a couple of turns.

Place something thin that won't rust or rot, like a nickel (or whatever you have around about that thickness) and place it between the channel and concrete floor at that deepest spot.

Re-tighten the screws.

Keeps the critters and water out.

champion6 03-20-2018 02:55 PM

Quote:

Originally Posted by photo1902 (Post 1525156)
You can have drains installed (a few local companies). In addition, you can unscrew the metal screen frame where it meets the floor, and shim the low spots.

Quote:

Originally Posted by HiHoSteveO (Post 1525165)
You can have this fixed in 10 minutes from now for free.

Locate where the water collects at its deepest spot.

At the aluminum channel at the bottom, loosen 3-4 screws at that deepest spot at least a couple of turns.

Place something thin that won't rust or rot, like a nickel (or whatever you have around about that thickness) and place it between the channel and concrete floor at that deepest spot.

Re-tighten the screws.

Keeps the critters and water out.

This solutions works. The shims I use are cable ties (zip ties). I slid them under the channel and trimmed off the excess.

Opmoochler 03-20-2018 03:29 PM

We had drains installed that have inside covers so the critters don't get in and the water can get out. When I want to clean off the floor, I can open all the covers at once and quickly hose and squeegee the water toward the drains. When the covers are closed, the drains still have channels so puddling water can exit.
B.J's Cap Drains 352-259-2744

photo1902 03-20-2018 04:15 PM

Quote:

Originally Posted by Opmoochler (Post 1525187)
We had drains installed that have inside covers so the critters don't get in and the water can get out. When I want to clean off the floor, I can open all the covers at once and quickly hose and squeegee the water toward the drains. When the covers are closed, the drains still have channels so puddling water can exit.
B.J's Cap Drains 352-259-2744

We too had drains installed. Within a year, the plastic "flaps" broke off.

DangeloInspections 03-20-2018 05:25 PM

Here is Tim Cox's website;
https://www.screenroomdrains.com/

The drain cover "doors" have a screw attachment so they should never break off. Tim does a great job. He did the screen room on my past home.

They look good and work well.

Frank

CFrance 03-20-2018 05:30 PM

The person who tiled our lanai drilled limber holes through the concrete. Every once in a while we have to take a shish kebab skewer and poke through them to get dirt out. Otherwise they work like a charm.

Jdmiata 03-21-2018 08:29 AM

I drilled small holes in the bottom , metal piece of the lanai , birdcage , both inside and outside as low as you can. You have to clean them out periodically , but it works fine.

Henryk 03-21-2018 08:49 PM

Thank you,everyone for your ideas. Lots of options to explore.

photo1902 03-22-2018 04:55 AM

Quote:

Originally Posted by DangeloInspections (Post 1525234)
Here is Tim Cox's website;
https://www.screenroomdrains.com/

The drain cover "doors" have a screw attachment so they should never break off. Tim does a great job. He did the screen room on my past home.

They look good and work well.

Frank

It’s hard to tell from the photos on the site you linked, but it appears the doors have been redesigned (it looks like they swing up?) The pricey ones I had installed, the doors swing open (basically a plastic hinge), of which both doors broke off.


All times are GMT -5. The time now is 07:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.32 (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.