Molding
 

Looking for a reliable reasonable referral for molding to be done on top of my kitchen cabinets.
Thank you!

If you know the manufacturer of the cabinets and if the cabinets are not discontinued you can go on line to the manufacturer's website and see the moldings they offer. Then you can call one of the suppliers here (i.e., Bailey Industries) who will order and install the molding. The warranty office will most likely have the manufacturer/cabinet model info, as well.

I recommend MICO, located in Wildwood (352-748-8011). They can order cabinets and trim for cabinets installed in Village homes, as well install. As the other poster suggested, call Home Warranty and they will look up the manufacturer, model and style of your cabinets (assuming they were not replaced by previous owners).

You can call home warranty, they can tell you who installed the cabinets, and then you can call them for the molding and installation. A word of caution, I installed matching cabinets and the matching crown molding. In my case this was a hard wood, and impossible to drive a nail into, so unless you have a suitable air nail gun, this is not a do it yourself project. I ended up very carefully drilling holes and using screws, but I had to make sure I did not go through the molding!!!