Garage door won’t open
Just moved in and problem with garage door. Romac MVP model. Yesterday when we came home, main garage door wouldn’t open. Door operator light (work light) on unit and red led on back of operator turn on, then red led turns off. Push button again and operator clicks and red led comes on then goes off. This happens using any of the remotes or the inside wall switch. Golf cart door works fine from same remotes.
Any ideas what is wrong? |
Check to be sure the "lock" button on the wall switch is not locked on.
|
Quote:
|
Chain may need adjustment.
|
Check that there is nothing blocking the sensor on the main door and that they're aligned. If you just moved in call warranty dep't they'll tell you how to handle it.
|
1 Attachment(s)
Quote:
Hope this helps. |
Call Ryan O'Cull, he'll fix it in 2 minutes. 352 617-0522
|
it might be stuck. Put vasaline between the side vinal and the door
|
agree that Ryan is the best person to call.. also check for bent electric eye thing on Bottom of garage door frame.
|
Quote:
|
Quote:
While I had to leave a voice message, Ryan did return my call in less than 30 minutes and arrived at my house some 15 minutes later today. Soon after his arrival, maybe 4 minutes my issue with the door was resolved. Needless to say, I will call Ryan first to handle garage door problems. Love to work with people who know what they are doing and cost less than half what others are charging. Ryan is the best! |
Quote:
I called him, and within an hour and a half both springs were replaced and we were back in action! Highly recommend him! |
[QUOTE=Fredster;1634416]I had a very similar experience with Ryan, when we had one garage spring break on a Saturday evening.
I called him, and within an hour and a half both springs were replaced and we were back in action! Highly recommend him![/QUOTE Had broken spring, Ryan was on it and done before I could round up the cash to pay him. Ryan, Ryan he’s you’re man. |
Last week I had the same problem! Door light would come on, but the door would not open. The motor would hum for about 15 seconds and stop. I called Ryan and he returned my call in about 10 minutes and he told me he would be at my house in about 20 - 25 minutes. 20 minutes later he arrived and in less than 5 minutes the garage door worked again. Best repair service I've gotten in 48 years of home ownership!!!! CALL RYAN!
|
Typically, if the motor starts up and the garage door doesn't move, the Allen screw on the flywheel (connected to the motor drive shaft) has backed itself out and the flywheel isn't turning. Also, the flywheel may have slid down the motor shaft and the drive belt has come off the flywheel. If you have Allen wrenches, this is easy to fix.
Quote:
|
All times are GMT -5. The time now is 02:31 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO v2.0.32 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.