HVAC insufficient in summer
Is anyone else south of 44 having issues with their air conditioning unit cooling the home sufficiently when the temperatures are in the mid to high 90’s?
|
No, last summer was very hot and had no problems and all is well currently. I change my filters every 6 months but they really don't need it. Our home has 2,700 Sq. Ft with AC and one bedroom doesn't seem to get as cool as the rest of the house, otherwise fine, we keep it at 75 during the day and 72 at night.
|
Spend $100 and have your system checked out.
|
Warranty
Quote:
|
As a quick check, on a hot day, go to the outside unit and feel the copper pipe with the black insulation on it. When the unit is running, the pipe should be cold and sweating. If not, then either the refrigerant level is low, or the compressor is not working.
|
Quote:
|
Have had Munns here 8 times.
|
Yes. We had Munns do the thermal testing. They said no problem with the insulation. We keeps the fans on all the time. House does not cool when temps are in mid to high 90’s. Can’t use the oven at all in the summer. Munns & The Villages are telling us if we want another air conditioner we have to pay for it. House is only 1 year old.
|
Quote:
|
Quote:
|
Quote:
|
Very important how is your house orientated, we put a barrier to block out the eyebrow window in our den, -we keep our house @ 73 day & 68 @ night year round--our t-stat shuts off which means it is satisfied with temps
|
By Florida code, your HVAC equipment is sized using the so-called Manual J calculation. This is a heat load calculation for your house that considers the home orientation, the insulation, the size and number of windows and doors, etc. For the cooling season, outside and inside temperature and moisture levels will be assumed. The assumed temperatures will be something like 93F outside and 75F inside. The installed equipment (inside air handler, outside condensing unit, and all duct work) should be able to maintain the assumed inside temperature with the assumed outside temperature. The assumed moisture levels do matter since it takes BTUs to condense out moisture.
Your Manual J calculation is on-line but I don't recall the county website. Munns will also have it. I recommend you obtain your Manual J calculation and then arrange a meeting with Warranty and Munns to go over why the installed equipment cannot meet the Manual J assumptions. Now, keep in mind that I don't know what sort of inside temperature you are trying to maintain when it is 95F outside with high humidity. If you are trying to maintain an inside temperature that is well below the Manual J design point then you probably don't have much of an argument. If you cannot maintain the assumed Manual J inside temperature when the outside temperature and moisture match the assumed Manual J values then I believe you have a reasonable argument for some remediation. Quote:
|
If you want to maintain a cooler temperature, you can add additional insulation in the attic, add a powered attic ventilator, and install drapes or plantation shutters on your windows. It is not always a good idea to install a larger HVAC unit because it may not run long enough to sufficiently control the humidity.
|
YES we do !!!!
We've had our vendor come out two times about cooling issues. After getting nowhere, had an outside vendor check the unit and said the ductwork is wrong. They stated the supply vents are to close to the return vents thereby removing the conditioned air before it enters the room. The correct supply vents should be above the windows, blowing toward the window in summer and winter. The return vent should be close to the exit door for the room.
I've learned to live with it because it would cost too much to change now... |
All times are GMT -5. The time now is 09:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO v2.0.32 (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.