ARC Fault Type Breaker
 

First off, I'm basically an idiot when it comes to electricity. I shouldn't be allowed to do so much as touch an electrical switch ...

So last week, for a reason I forget, I turn off a few breakers. 2 were Arc Fault Breakers. I pushed the "test button" and one of them didn't seem to do anything.

When I was done doing whatever I was doing, I switched all the breakers back on and all seemed to be ok.

I noticed tonight, that my Guest Room, Guest Bathroom and Lanai lights aren't working. The ARC Fault breaker is in the "ON" position. It is not tripped into the OFF position. Pushing the "test" button doesn't do anything.

... but I still don't have lights in those 2 rooms. Could there be a GFI somewhere hidden in those rooms that might need to be reset?

Suggestions?

First, you need to turn circuit breakers to the full OFF position before turning them back ON. I am guessing the one breaker actually tripped (was this the one you pushed the test button?), you did not notice it, and just pushed it on which will NOT turn on the breaker.

Try this, and if it does not work, send me a PM and I can stop by and take a look.

I'm glad I prefaced everything, but admitting I'm an idiot with electricity. I did know you have to complete shut off the breaker before turning it back on ... but I apparently didn't completely shut it off, the 113 times I tried.

It is now working fine. Thank you !!!!

My breakers have to have flip to off them quick hard snap to on. Mine seems like it I don’t flip it hard enough for fast enough it won’t reset. :Screen_of_Death:

For reference, a breaker that trips also needs to be flipped fully off. It's also recommended to wait a minute before trying to turn it back on. Necessary for some breaker designs, but not all.

Exactly what happened. Thanks

Bathrooms where there’s water have a reset button on one of the electrical plants push the reset, & your lights will come back on!