Talk of The Villages Florida

Talk of The Villages Florida (https://www.talkofthevillages.com/forums/)
-   The Villages, Florida, General Discussion (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/)
-   -   AC Running a Lot (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/ac-running-lot-40953/)

ilovetv 08-06-2011 02:22 PM

Quote:

Originally Posted by GeorgeT (Post 378325)
Thanks to everyone that responded. I'm going to try the filters that Larry recommended and I guess the bottom line is it's freakin' hot out!
We keep a window unit in the bedroom so we're always cool at night. We just moved here from VT in January so I guess we need to get acclimated.

It's good to get a heating/cooling seasonal tune-up/check-up and get onto the HVAC company's service plan. Munn's is good and thorough for about $120 (can't remember the exact amount). Maybe your freon is low.

Also, it does take awhile for us northerners to get acclimated to the heat, but it happens eventually. If you would go back to VT this coming September, you'd probably think it feels "arctic" there with 72 degrees and low humidity!

logdog 08-06-2011 02:25 PM

I bought mine on ebay for less than $25 each with free shipping. Usually, you have to buy 2 at a time to get the free shipping. If you buy them local, they will charge at least twice that.

My home inspector recommends ushomefilter.com where you can buy them for less than $20 each if you buy 3 at a time. Not sure what they charge for shipping.

These filters are changed only once a year.

Larry Wilson 08-06-2011 02:41 PM

Tommy,

I found the 1" filters on the website Filters4Life.

Villagegolfer,

I went to Filters4Life and they have the 4" filters listed by specific air conditioners, but these other guys on this post seem to have found sources that are cheaper.

Good question, and good responses.

laryb 08-06-2011 06:31 PM

I've been looking for 2 days for filters. We've probably had the same inspector, because I was told about ushomefilter.com too. I couldn't find my filter on their site, or any other site. I will call them Monday and post how I make out. A friend of mine said that he found someone who will custom make filters, so I will contact him when I get the # and post those results also. The actual dimensions of my filter are 19 1/8" x 19 13/16" x 4 5/16" (19.125" x 19.8125" x 4.3125") and is a merv 8.The model # on the filter is FILXXFNC0021 The merv 11 model #is FILXXFNC0121

rosehillman 08-06-2011 06:53 PM

Quote:

Originally Posted by GeorgeT (Post 378050)
I have my AC set to 76 during the day. Yesterday the temperature was up to 78 inside the house. I changed the filter, it was dirty but not real dirty because I changed it about a month ago. It took 3 hours for the temp to drop back down to 76 in the early evening. I had the AC serviced 2 months ago and all was fine.

Filters are expensive. What type of filter do some of you use and how often do you change it?

I would change it once a month. If it does not looked clogged or dirty possibly the unit is in need of repair.

villagegolfer 08-06-2011 06:55 PM

Quote:

Originally Posted by rosehillman (Post 378486)
I would change it once a month. If it does not looked clogged or dirty possibly the unit is in need of repair.

These are High Efficiency Filters and need to be changed only once a year.

villagegolfer 08-06-2011 06:58 PM

Quote:

Originally Posted by laryb (Post 378481)
I've been looking for 2 days for filters. We've probably had the same inspector, because I was told about ushomefilter.com too. I couldn't find my filter on their site, or any other site. I will call them Monday and post how I make out. A friend of mine said that he found someone who will custom make filters, so I will contact him when I get the # and post those results also. The actual dimensions of my filter are 19 1/8" x 19 13/16" x 4 5/16" (19.125" x 19.8125" x 4.3125") and is a merv 8.The model # on the filter is [B]FILXXFNC0121[/B]

Are you sure about the number? Mine is FILXXFNC0021.

laryb 08-06-2011 08:15 PM

Quote:

Originally Posted by villagegolfer (Post 378491)
Are you sure about the number? Mine is FILXXFNC0021.

Thanks for catching that. The # I quoted was for a merv 11. I have corrected my original post. Probably a senior moment!

logdog 08-07-2011 01:01 PM

Try this: http://www.ushomefilter.com/filters/...BFNC0021-.html or this: http://www.iaqsource.com/search.php?..._continue=Find

villagegolfer 08-07-2011 01:20 PM

Quote:

Originally Posted by logdog (Post 378757)

Good link logdog. I didn't pull the trigger yesterday but decided to use your 1st link and I got 2 filters for $62. Thanks

rjm1cc 08-07-2011 06:03 PM

Quote:

Originally Posted by GeorgeT (Post 378050)
I have my AC set to 76 during the day. Yesterday the temperature was up to 78 inside the house. I changed the filter, it was dirty but not real dirty because I changed it about a month ago. It took 3 hours for the temp to drop back down to 76 in the early evening. I had the AC serviced 2 months ago and all was fine.

Filters are expensive. What type of filter do some of you use and how often do you change it?

My guess is that you might only be able to cool your house to 20 degrees less than the outside. (Of course depending on insulation, window tinting, etc.) and your unit could be working properly even though the temp got to 78 inside.
You should be able to find your manual on line and see what the specs are.

GeorgeT 08-07-2011 06:25 PM

Quote:

Originally Posted by villagegolfer (Post 378489)
These are High Efficiency Filters and need to be changed only once a year.

After 45 days my $12 Sweet Bay filter gets very dirty. I don't understand how I could leave any type of filter in the system for a whole year. What is different about high energy filters? Don't they get just as dirty?

GeorgeT 08-10-2011 05:48 PM

Quote:

Originally Posted by GeorgeT (Post 378943)
After 45 days my $12 Sweet Bay filter gets very dirty. I don't understand how I could leave any type of filter in the system for a whole year. What is different about high energy filters? Don't they get just as dirty?

Bueller, Bueller.....Anyone?

ducati1974 08-10-2011 07:24 PM

GeorgeT- the filter you are buying from Sweetbay is probably only a one inch thick filter while the true high efficiency filters are 4-5" thick. They are made in an accordian style so you get a helluva lot more area of filter- thus they'll last a lot longer than the 1". I don't recommend buying the 1" thick "high efficiency" filters to my customers unless they're prepared to replace them once a month. There just isn't enough filter area in them and they're too restrictive.

GeorgeT 08-11-2011 04:46 AM

Quote:

Originally Posted by ducati1974 (Post 380414)
GeorgeT- the filter you are buying from Sweetbay is probably only a one inch thick filter while the true high efficiency filters are 4-5" thick. They are made in an accordian style so you get a helluva lot more area of filter- thus they'll last a lot longer than the 1". I don't recommend buying the 1" thick "high efficiency" filters to my customers unless they're prepared to replace them once a month. There just isn't enough filter area in them and they're too restrictive.

Thanks ducati1974. That makes perfect sense. The brackets that hold my 1 inch filter would would have to be replaced if I went with a 4-5 inch filter, right? Or is the perimeter of the 4-5 inch filter 1 inch as to fit under the brackets?


All times are GMT -5. The time now is 09:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.32 (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.