villagetinker |
10-13-2023 09:10 PM |
ED, after rereading, the thread, here is what I would do:
1. Contact home warranty and ask them who does this work for new installs.
2. Call this contractor to see if they can work with you to install a new duct.
3. Discuss with above contractor about taking duct from kitchen, 45-degree angle to guest bathroom, and 45-degree angle to ceiling, then straight up to roof.
4. As noted above if the first contractor cannot cut the hole in the roof and properly seal the penetration, have a roofer ready to do this work.
This approach will keep the kitchen clean and will not impact the existing cabinets, and should have minimal impact on the guest bathroom.
The exhaust fan port on the microwaves appear to be centered and a standard size, also the typical UNDER CABINET range hoods seem to share the same location for the fan port. This approach allows for the removal of the microwave and the replacement with a hood at minimal cost. One work of caution, if you get the backsplash tiled (or similar) then you will have an unfinished area when the microwave is removed.
Hope this helps with your project.
|