Garage door maintenance

Closed Thread
Thread Tools
  #1  
Old 10-03-2018, 05:35 PM
queasy27 queasy27 is offline
Veteran member
Join Date: Mar 2011
Posts: 868
Thanks: 457
Thanked 332 Times in 144 Posts
Default Garage door maintenance

My garage door spring broke this week and I later discovered that two of my neighbors had the same problem over the last year. Our houses were built in 2004, which is apparently getting to the end of a spring's lifespan.

Apologies to those who are well aware of this (and perhaps @DangeloInspections has more detailed information to add), but just a friendly heads-up that it's probably best on older homes to inspect the spring every so often. It never occurred to me at all.

Nobody wants the door falling on their car as they drive in or out!
  #2  
Old 10-03-2018, 06:23 PM
Fredster Fredster is offline
Gold member
Join Date: Jun 2015
Posts: 1,417
Thanks: 219
Thanked 400 Times in 148 Posts
Default

Quote:
Originally Posted by queasy27 View Post
My garage door spring broke this week and I later discovered that two of my neighbors had the same problem over the last year. Our houses were built in 2004, which is apparently getting to the end of a spring's lifespan.

Apologies to those who are well aware of this (and perhaps @DangeloInspections has more detailed information to add), but just a friendly heads-up that it's probably best on older homes to inspect the spring every so often. It never occurred to me at all.

Nobody wants the door falling on their car as they drive in or out!
One of the springs broke on our garage door about two weeks ago, and our home was also built in 2004.
I’m curious as to what you would look for when inspecting the springs?
I would guess the metal fatigues in time with repeated stress, and the metal eventually snaps at the weakest point.
Highly recommend Ryan O’Cull for replacement and door service. 352-617-0522
  #3  
Old 10-03-2018, 08:34 PM
Kahuna32162's Avatar
Kahuna32162 Kahuna32162 is offline
Gold member
Join Date: Jul 2013
Posts: 1,244
Thanks: 109
Thanked 397 Times in 158 Posts
Default

Quote:
Originally Posted by Fredster View Post
One of the springs broke on our garage door about two weeks ago, and our home was also built in 2004.
I’m curious as to what you would look for when inspecting the springs?
I would guess the metal fatigues in time with repeated stress, and the metal eventually snaps at the weakest point.
Highly recommend Ryan O’Cull for replacement and door service. 352-617-0522

Ryan is the best in The Villages, hands down.
__________________
Mark & Linnae
Birmingham, The U.P., Saginaw, Bay City, Toledo, Columbus, Dayton
& The Village of Chatham

"I wish I didn't know now, what I didn't know then"
-Bob Seger-
  #4  
Old 10-03-2018, 09:00 PM
queasy27 queasy27 is offline
Veteran member
Join Date: Mar 2011
Posts: 868
Thanks: 457
Thanked 332 Times in 144 Posts
Default

Quote:
Originally Posted by Fredster View Post
I’m curious as to what you would look for when inspecting the springs?
There are suggestions online on what and how to check, but who knows how accurate they are. There are so many different types of doors and mechanisms.
  #5  
Old 10-04-2018, 09:46 AM
Jima64 Jima64 is offline
Platinum member
Join Date: Feb 2015
Posts: 1,546
Thanks: 161
Thanked 217 Times in 81 Posts
Default

I was taught to wind the springs 7 tunrs on a normal double wide door. You can verify this if they ran some chalk on the spring before winding. Also wipe the springs yearly with oil to keep them lubed. Checking the winding will show you if the spring is slipping. Of course this was years ago.
  #6  
Old 10-04-2018, 09:50 AM
photo1902 photo1902 is offline
Sage
Join Date: Nov 2014
Posts: 3,223
Thanks: 1,607
Thanked 1,742 Times in 703 Posts
Default

Quote:
Originally Posted by queasy27 View Post
There are suggestions online on what and how to check, but who knows how accurate they are. There are so many different types of doors and mechanisms.
And in my opinion. replacing the springs is one job I leave to the pros.
  #7  
Old 10-04-2018, 10:00 AM
Chatbrat Chatbrat is offline
Sage
Join Date: Sep 2014
Posts: 4,411
Thanks: 0
Thanked 985 Times in 382 Posts
Default

coil springs can easily break your arm--use Ryan, he's a pro-doesn't charge much--most likely you don't have the proper pins for locking the spring keepers,
  #8  
Old 10-06-2018, 09:20 AM
Bryant Bryant is offline
Senior Member
Join Date: Jul 2007
Posts: 426
Thanks: 1
Thanked 1 Time in 1 Post
Default

Ditto Ryan O'Cull.
__________________
The Villages (Polo Ridge; Piedmont), Toms River, Brick, Spring Lake Heights, NJ and Bronx, NY
  #9  
Old 10-06-2018, 10:02 AM
bbbbbb bbbbbb is offline
Veteran member
Join Date: Nov 2014
Location: Sumter landing
Posts: 575
Thanks: 0
Thanked 6 Times in 4 Posts
Default Door springs

[QUOTE=Chatbrat;1587299]coil springs can easily break your arm--use Ryan, he's a pro-doesn't charge much--most likely


Suggestion: Every 4 months, have a small tag on door for a reminder. Run the door up and down, use a semi stiff brush to do the rollers and guides and springs. As door goes up and down. spray a small amount of WD ON the pins holding the runners. Wipe off excess. On the springs,,,,,,,,,,,,,,,,,,,,,,,,,LEAVE THEM ALONE YOU ARE NOT A DOOR SPECIALIST. also CHECK WITH MVP DOORS, THEY ARE ON rolling acres, AND WILL GIVE GOOD ADVICE. YOU CAN BE HURT BADLY BY PRETENDING TO BE A DOOR INSTALLER. also STAY AWAY FROM THE OCCASIONAL MECHANIC COMING AROUND. BE SAFE.

bbbbbb
  #10  
Old 10-06-2018, 05:01 PM
Topspinmo's Avatar
Topspinmo Topspinmo is offline
Sage
Join Date: Dec 2012
Location: Somewhere over the rainbow
Posts: 12,167
Thanks: 6,271
Thanked 4,845 Times in 2,404 Posts
Default

IMO there no way knowing when garage door spring going to fail. Usually here Big Bang or pop like gun when off and rattling sound of the spring vibrating. If you listen to your garage door sound as it goes up and down you will hear change when problem has occurred. Or just look up at the springs periodically and you can see the difference in two and the popped on will be unwind and floppy on one end.

The garage door not going to fail with one spring broke, but it puts pressure on the door motor having to pull half the weight or the garage door due to both springs or more counter balances the weight of the garage door to make it easy to lift manually and easier for the door motor to lift. My house was alao built in 2003/2004 time frame. Had broken spring two years ago. Who knows how many times they have been replaced, depends on cycle times. Mine goes up and down several times a day, more cycling sooner it will fail. Ryan IMO this the best And loves cash payment. I wouldn’t even attempt to replace it myself unless I had to. IMO too dangerous for the jack of all trades.
  #11  
Old 10-06-2018, 06:29 PM
pklein9747 pklein9747 is offline
Senior Member
Join Date: Jul 2010
Posts: 303
Thanks: 5
Thanked 24 Times in 10 Posts
Default

Ours broke this past week. Home built in 2008. Called Ryan O'Cull. Came within 20 minutes. Replaced both springs. We're back in business. Yeah Ryan!!
  #12  
Old 10-06-2018, 07:18 PM
Jima64 Jima64 is offline
Platinum member
Join Date: Feb 2015
Posts: 1,546
Thanks: 161
Thanked 217 Times in 81 Posts
Default Previous

Quote:
Originally Posted by Jima64 View Post
I was taught to wind the springs 7 tunrs on a normal double wide door. You can verify this if they ran some chalk on the spring before winding. Also wipe the springs yearly with oil to keep them lubed. Checking the winding will show you if the spring is slipping. Of course this was years ago.
I should add to,my posting that at that time I was a garage door installer and repair person for Overhead Door company in another city. I mention counting the chalk marks only to see if the spring has slipped. We also told people to once a year wipe some oil across the springs and move the door up and down. I would not do any replacement work because of the danger as a homeowner
  #13  
Old 10-06-2018, 08:14 PM
EdFNJ EdFNJ is offline
Sage
Join Date: Nov 2016
Posts: 4,383
Thanks: 1,375
Thanked 3,094 Times in 1,336 Posts
Default

[QUOTE=bbbbbb;1587773]
Quote:
Originally Posted by Chatbrat View Post
coil springs can easily break your arm--use Ryan, he's a pro-doesn't charge much--most likely


Suggestion: Every 4 months, have a small tag on door for a reminder. Run the door up and down, use a semi stiff brush to do the rollers and guides and springs. As door goes up and down. spray a small amount of WD ON the pins holding the runners. Wipe off excess. On the springs,,,,,,,,,,,,,,,,,,,,,,,,,LEAVE THEM ALONE YOU ARE NOT A DOOR SPECIALIST. also CHECK WITH MVP DOORS, THEY ARE ON rolling acres, AND WILL GIVE GOOD ADVICE. YOU CAN BE HURT BADLY BY PRETENDING TO BE A DOOR INSTALLER. also STAY AWAY FROM THE OCCASIONAL MECHANIC COMING AROUND. BE SAFE.

bbbbbb

I read somewhere to NOT use WD40 but to use LITHIUM GREASE SPRAY on door parts/tracks/rollers because WD40 is mostly water.


How to Lubricate a Garage Door: 10 Steps (with Pictures) - wikiHow
  #14  
Old 10-07-2018, 08:49 AM
Topspinmo's Avatar
Topspinmo Topspinmo is offline
Sage
Join Date: Dec 2012
Location: Somewhere over the rainbow
Posts: 12,167
Thanks: 6,271
Thanked 4,845 Times in 2,404 Posts
Default

[QUOTE=EdFNJ;1587940]
Quote:
Originally Posted by bbbbbb View Post


I read somewhere to NOT use WD40 but to use LITHIUM GREASE SPRAY on door parts/tracks/rollers because WD40 is mostly water.


How to Lubricate a Garage Door: 10 Steps (with Pictures) - wikiHow
IMO Unless you wipe off all the overspray of the grease and it actually gets into the rollers all it going to do collect dust and dirt. Dirt has fine sand particles which act like sand paper eating up roller surface and tracks. So, my suggestion is us it sparingly with nozzle that direct the stream rather than spray.

IMO if WD40 mostly water why don’t it rust the tools I us it on with unplated surfaces? WD 40 evaporates in little time why it not as effective as grease. IMO the evaporation get rid of the moisture until you use the tool again.
  #15  
Old 10-07-2018, 08:57 AM
CWGUY CWGUY is offline
Sage
Join Date: Aug 2012
Posts: 3,879
Thanks: 4,279
Thanked 1,661 Times in 727 Posts
Default

[QUOTE=EdFNJ;1587940]
Quote:
Originally Posted by bbbbbb View Post


I read somewhere to NOT use WD40 but to use LITHIUM GREASE SPRAY on door parts/tracks/rollers because WD40 is mostly water.


How to Lubricate a Garage Door: 10 Steps (with Pictures) - wikiHow
GOOGLE is our friend.......

"WD-40® literally stands for Water Displacement, 40th formula. That's the name straight out of the lab book used by the chemist who developed the product back in 1953. The chemist, Norm Larsen, was attempting to concoct a formula to prevent corrosion—a task which is done by displacing water."

Closed Thread

Tags
door, garage, spring, inspect, homes

Thread Tools

You are viewing a new design of the TOTV site. Click here to revert to the old version.

All times are GMT -5. The time now is 04:27 AM.