Outside light post

Closed Thread
Thread Tools
  #1  
Old 10-22-2020, 07:19 PM
jayerose jayerose is offline
Senior Member
Join Date: Jun 2013
Posts: 251
Thanks: 18
Thanked 72 Times in 41 Posts
Default Outside light post

We live in a Courtyard Villa and our front lamppost light holds three lightbulbs; only one blue is working and yes, we changed each one numerous times.

Has this happened to anyone?
  #2  
Old 10-22-2020, 07:41 PM
villagetinker's Avatar
villagetinker villagetinker is offline
Sage
Join Date: Sep 2013
Location: Village of Pinellas
Posts: 9,669
Thanks: 2
Thanked 6,148 Times in 2,247 Posts
Default

Outside lights can be subject to corrosion problems, this may be why only one of three lamps are working. IMHO, you have 2 options, first would be to have the entire lamp replaced on the existing post, the other would be to have someone look at then possibility of rebuilding the existing lamp. I saw at Lowe's that had replacement parts for these type of lamps on an end cap in the fans area. I have seen the 3 lamp lights fail, one was at a neighbors. Corrosion caused the wiring to fail.
__________________
Pennsylvania, for 60+ years, most recently, Allentown, now TV.
  #3  
Old 10-22-2020, 07:42 PM
Topspinmo's Avatar
Topspinmo Topspinmo is offline
Sage
Join Date: Dec 2012
Location: Somewhere over the rainbow
Posts: 12,381
Thanks: 6,346
Thanked 4,921 Times in 2,447 Posts
Default

Most likely it corrosion grounding problem.. if you do this yourself MAKE sure you trip the breaker on master that powers front porch light. It should be labeled. Verify by making sure the one light that working goes out when you trip the breaker.
  #4  
Old 10-22-2020, 07:52 PM
Toymeister's Avatar
Toymeister Toymeister is offline
Platinum member
Join Date: Sep 2016
Posts: 1,685
Thanks: 345
Thanked 2,346 Times in 734 Posts
Default

I would start with a simple a cheap diy repair first.

Buy a 3/8 dowel, 220 sandpaper, and elmer's glue.

Glue a tiny bit of sandpaper on the dowel end. Trim, when dry sand the bottom contact. Take a small strip to form a small cylinder to sand the outside contact (threaded part). Finally use needle nose pliers to pull the now pushed down bottom contact.

Blow out the socket.

There is a good chance this will fix it.
Closed Thread

Tags
light, working, changed, numerous, times


You are viewing a new design of the TOTV site. Click here to revert to the old version.

All times are GMT -5. The time now is 07:53 AM.