Retrofitting a gas home to electric ???

Closed Thread
Thread Tools
  #1  
Old 03-09-2011, 12:40 PM
JohnN's Avatar
JohnN JohnN is offline
Sage
Join Date: Feb 2007
Posts: 3,575
Thanks: 6
Thanked 1,658 Times in 592 Posts
Default Retrofitting a gas home to electric ???

I really don't have a clue on the HVAC/stove/dryer.

Can a house be readily and affordably converted to electric?
and how much will that hit my wallet?
anyone ever do this??

just wanting to learn a bit on this topic. thanks
  #2  
Old 03-09-2011, 12:51 PM
Bill-n-Brillo's Avatar
Bill-n-Brillo Bill-n-Brillo is offline
Sage
Join Date: Sep 2010
Location: Granville, OH.....and TV snowflakes!
Posts: 6,905
Thanks: 0
Thanked 2 Times in 2 Posts
Default

John, if you're referring to a house in TV, you might want to look behind the stove and the dryer and/or check your breaker panel. Our patio villa has natural gas appliances and the house was built pre-wired with the 220 volt receptacles already in place for an electric stove and dryer. Also, the appropriate breakers are in place in the breaker panel as well. If that's the case with your house, all you'd need to do is replace your two gas appliances with electric ones, cap the gas lines to those two appliances, and you're good to go. Otherwise, it would be a matter of running new wiring for each from your existing breaker panel. You'd also need to verify that there's room in the panel for the additional breakers and that the electrical service to the house is adequate to support the additional load required to support the new electrical appliances.

As far as the furnace goes, you'd need to replace it with either a straight electric furnace or replace it with a heat pump (more efficient than just a straight electric furnace for a heat source). A qualified HVAC contractor could tell you if any of your current A/C stuff could be utilized with whichever replacement unit route you'd choose to go. You'd need to have some new wiring done as either of the two new furnace choices will require additional amperage to operate vs. your current gas furnace.

Hope that helps!

Bill
Closed Thread

Thread Tools

You are viewing a new design of the TOTV site. Click here to revert to the old version.

All times are GMT -5. The time now is 01:14 PM.