Originally Posted by villagetinker (Post 2351252)

Velvet, send me a PM and I would be happy to help you, along with removing the wires, you need to label the polarity, and which speaker and the location of the speaker (painters' tape and a magic marker). Then once the new flooring is installed, I can help with the reinstallation if necessary. I am guessing the wires are hidden under the molding above the carpet, if this is the case and the installers use quarter round you will need to think about the wires as these will now be visible.
If you are after an installation with all of the wiring hidden, you may want to contact one of the local audio visual companies and get an estimate for the new wiring. Feel free to send me a PM and we can discuss further over the phone.

Originally Posted by rsmurano (Post 2351492)

....

I deal with $50,000-$100,000+ audio systems and there are much better sounding systems than Sonus that are fairly inexpensive.

Originally Posted by Altavia (Post 2351519)

Much less how many people in our demographic have hearing good enough to distinguish better average and high quality audio.

Originally Posted by Velvet (Post 2351224)

I am not sure how to disconnect the speaker wires. My husband had set up a sound system with 7 speakers for the TV receiver and some of the wires go under the floor. (I am up north at this time.) I am changing the carpet to wood flooring and the installers will not disconnect electronic equipment. Husband passed away suddenly and I can’t ask how he installed the sound system. So if anyone could give me advice on how to do it myself, I would be grateful.

Originally Posted by JRcorvette (Post 2351571)

If you want to keep the sound system run the wires under the base molding trim before the floor is laid down. Or if you prefer just remove the wires and sell the equipment and get a nice simple Sound Bar which will probably be much easier for you to use.

TV Tom on here could do everything for you.

Originally Posted by Velvet (Post 2351609)

Originally Posted by Velvet (Post 2351609)

Another question, (by the way I am working on a house over 1000 miles from TV at the moment - I’d have to fly Tom here. He did the instal at my TV home.) The wired sound system is the top of the line - so I would like to reinstall after flooring is done. I was thinking that only the back speakers need long wiring, what if I mixed the system and replaced the back speakers only with wireless? I think the speakers would have to be calibrated to work in sync. Any thoughts?

Originally Posted by Velvet (Post 2351649)

The current system is excellent, wired speakers at this level can’t be matched in sound quality by a wireless system. But, I will look into both options though. The wires were specially selected for their quality, I can’t remember the material but I know they cost a lot. I can reuse them possibly. (Husband used to do the sound for movies in the studio and brought some of his knowledge home.)

Originally Posted by Velvet (Post 2351224)

I am not sure how to disconnect the speaker wires. My husband had set up a sound system with 7 speakers for the TV receiver and some of the wires go under the floor. (I am up north at this time.) I am changing the carpet to wood flooring and the installers will not disconnect electronic equipment. Husband passed away suddenly and I can’t ask how he installed the sound system. So if anyone could give me advice on how to do it myself, I would be grateful.

Originally Posted by RoadToad (Post 2351494)

I think the ones on the right are just wire end adapters to make them banana compatible. They should also be able to be just pulled out. Unscrewing shouldn't be necessary . Polarity is already signified by color of plug ends.

Originally Posted by rsmurano (Post 2351492)

Do not, do not remove the speaker wires with the receiver is on. You will either short out the speaker or short out the amp especially if the amp is a tube amp. People don’t know what they are talking about here. Also never unplug the rca cables with the receiver/amp is on, you will short out the amp.
Sonus sound is not very good. I deal with $50,000-$100,000+ audio systems and there are much better sounding systems than Sonus that are fairly inexpensive. For example, if you want great sound for the money, and only need 1 channel or 2, get 2 Apple HomePods (the big versions) for $300 each. Wireless, controlled by your iPhone/ipad or by Siri. A step up would be the Kef LS50 II wireless with their subwoofer, about $3000 for everything. Both of these system have the amps built in to the speakers so no need to buy an amp.
Also, most wireless speakers are a compromise, especially the cheaper systems, and you normally get wireless when you can’t run wires. The Kef system above connects to your tv and internet. You can run the 2 Kef speakers wireless but they sound better if you run a cable from 1 speaker to the other.
I gave up on expensive home theater systems and just use 2 channels with a subwoofer. If you want a 5 channel home theater system, then get a quality Yamaha or Definive Technology soundbar with 5 channels and an external subwoofer. You will need an amp with 5 channels but the wiring will be short from the amp to the soundbar. These soundbars mimic 5 channels by bouncing the surround channels off the side walls.

Originally Posted by Velvet (Post 2351712)

Yes, I could pull the plugs out but I had to unscrew what they were in first. Then I had to take the plug off the wire with a tiny screw driver so I could pull the wire through the floor because they are going to put new floor on top. The hole was too small for the plugs. I marked the black wire with black tape on both ends of the wire, incase I want to put it back.

Thank you for everyone’s advice. Media systems absolutely intimidate me. But I believe in learning.