Scorpyo |
01-02-2022 12:30 PM |
Try Costco on-line. They have a large selection from which to choose.
They install the new one, take away the old one and add an extra year to the warranty, giving you 2 years. They also offer an addition 3 years priced reasonably.
That being said, if you have a little DIY in you, you can remove the agitator or impeller (either of which your washer has). One plastic cap and one screw. Once removed look and see if there's anything there that doesn't belong, like a coin, or in my case, a little metal button. If you have something there that may be the problem and removing it may solve the problem. If there's nothing there I'd recommend buying a new unit as you could wind up replacing the stator, rotor, gearcase/transmission and maybe even the tub. Been there, done that. Mine was under warranty (the 2nd Costco year) so they replaced everything - 4 visits. Long story but the apprentice repairman messed up the repair (stator and rotor) so it went from a slight grinding noise, to an overwhelming grinding noise (stator) to a loud base drumming noise during the spin cycle which was the tub. Another stator and tub finally corrected the subsequent issues. 9 months later it's still quiet as a mouse. I'm convinced the metal button was causing the initial grinding noise but they wanted to replace other parts. Who was I to object?
|