Talk of The Villages Florida - Whole House surge supressors

Talk of The Villages Florida (https://www.talkofthevillages.com/forums/)

- The Villages, Florida, General Discussion (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/)

- - Whole House surge supressors (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/whole-house-surge-supressors-350244/)

Quote:

Originally Posted by JRcorvette (Post 2334700)

The Most Effective ones are ones that you install inside your Breaker Box. They cost a few hundred dollars and are easy to install.

It seems to me you want to stop the surge before it gets into your house.

Quote:

Originally Posted by Stu from NYC (Post 2334707)

It seems to me you want to stop the surge before it gets into your house.

We asked the same question when the electrician for the pool was here. He didn’t install so no hard sell, but strongly suggested to only use on outside line. The pool has its own line, not coming from fuse box, so protector in fuse box would not help.

So we went with Seco, as he suggested. There has been 3 lightning strikes on homes. Damage to the roof and appliances, electronics, irrigation controllers, and pool controls

Quote:

Originally Posted by Altavia (Post 2334680)

Any idea how many homes have been struck the past 5 years?

I'm aware of 5 south of 44. Two were total loss and still are not habital two years later.

The gas lines in the attic were enough to convince me to have a LPS installed to reduce the risk.

This will be discussed at the POA meeting on June 18, 7 PM at Laurel Manor.

Quote:

Originally Posted by Stu from NYC (Post 2334707)

It seems to me you want to stop the surge before it gets into your house.

That works best for surges coming from the power lines.

The lightening can also induce surges into the house via nearby ground strike or into the house wiring from the electro-magnetic field. This is why local protection is also recommended for key devices.

Quote:

Originally Posted by asianthree (Post 2334718)

Wonder where to power to run the pump comes from?
Ahhh... it does not come from the "fuse box". It comes from the circuit breaker panel. Where the surge protection would also be located (in or right before).

Quote:

Originally Posted by djlnc (Post 2334461)

This one looks interesting. I looked on Amazon and see that some folks mounted it inside the breaker box and drilled two small holes in order to view the status LEDs. Anybody know what the NEC has to say about drilling holes in the breaker box cover?

I've wondered the same thing. Note he said he was an electrician. Doesn't make it legal but I thought it interesting.

Quote:

Originally Posted by Pamelaripp (Post 2334621)

Yes, get a SECO Surge Suppressor! It is far superior to any other whole house surge suppressor that an every day Electrician would be able to install and has a more powerful Joule rating than an ordinary whole house surge suppressor has. In addition, install plug in surge suppressors on your TVs and computers, etc.

I've lived in Florida (lightning capital of the USA) for over 20 years and know many people who have paid a very high price for surges damaging their homes (including me)! You don't need to suffer a direct hit from lightning to experience a lot of damage. Even if you have homeowners insurance, you still need to pay the deductible and chances are that will cost much more than the SECO surge suppressor! I think that The Villages should ask SECO to install their whole house surge suppressors in ALL NEW homes!

While the Seco surge protector installed at the meter is necessary in the layered surge protection approach, its designed mainly to reduce and or stop large surges coming from the power utility which occurs about 20% of the time according to a study done by Leviton. This is why many times homeowners will report that they had a strike and suffered damage to appliance and electronics even though the Seco surge protector was fine and never triggered. It's because the power surge didn't come from the power utility lines.

The Type-2 surge protector installed by an electrician at the circuit breaker box also blocks surges coming from the utility line but also reduces and or blocks power surges coming from all the branch circuits which occurs about 80% of the time. This surge protector is designed to protect sensitive electronic equipment while the Seco protector clearly states in its warranty that it does not guarantee protection for any device with an electronic chip. As far as stopping the surge Before it comes into your house, The Type-2 protector such as the Eaton Ultra is designed to be connected to the closest breaker slot to the main feed in the circuit breaker panel just for this reason. You want the protector as close to the power source coming from the utility as possible because many power surges are very fast and the length of the wires and the location to the main breaker can make a difference.

Hope this clears things up.