Remove all cabinet doors drawers & knobs and hinges. Then lightly sand all surfaces with a sanding sponge, wipe every thing down with a degreaser. Apply a coat of XIM or PRO Block oil based primer. Let dry then lightly sand again then wipe down. You are finally ready to paint, using a 6in long boy short nap roller and a good nylon latex brush, apply your first coat or Sherwin Williams PRO Classic (semi gloss) water based enamel. Let dry lightly sand and apply the final coat. Re-install the hardware re-align the doors and you are done. Good Luck Len & Mary any questions call 352-205-8213.
|