Quote:
Originally Posted by Jersey Joe
How do you program the controller? Reply back to Jersey Joe
|
Here's a link to the MVP manual. Page 11 shows how to reprogram the code on the remotes. Page 12 shows how to reprogram the overhead unit to accept the new code. In one home I had to reprogram the overhead unit, too. In another home I was able to just reprogram the remotes.
Write down the code before you program it so that you can reprogram other remotes with the same code. You need to be in the garage to do it. If you can't get it reprogrammed, just call the Romac. They will walk you through it. There are over 19,000 possible codes. Try not to just alternate "+" and "-" because I think that's what the installers do. Use all three buttons.
Another tip, after you finish, walk outside with your remote and verify that you cannot open any of your neighbors garages.
http://data.manualslib.com/pdf/1/45/...c05ef3e9e68a34