Talk of The Villages Florida

Talk of The Villages Florida (https://www.talkofthevillages.com/forums/)
-   The Villages, Florida, General Discussion (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/)
-   -   Water on the lanai (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/water-lanai-41833/)

ducati1974 08-27-2011 07:08 PM

Water on the lanai
 
Anyone else have a problem with rain blowing thru the screens and pooling in the lanai? It seems to be worse now that we have tiled the floor. Possibly it seeped under the bottom aluminum rail before, but now is dammed by the rail. I'm thinking about removing that bottom rail and instead installing flat aluminum stock (1/4" thick by 2" wide) with the screen tucked under so that the tile will now be slightly higher than the new aluminum, allowing the water to flow out. Any thoughts (other than windows)? Thanks! Unfortunately I can't try my "fix" until January when I return.

Bogie Shooter 08-27-2011 07:24 PM

Quote:

Originally Posted by ducati1974 (Post 387196)
Anyone else have a problem with rain blowing thru the screens and pooling in the lanai? It seems to be worse now that we have tiled the floor. Possibly it seeped under the bottom aluminum rail before, but now is dammed by the rail. I'm thinking about removing that bottom rail and instead installing flat aluminum stock (1/4" thick by 2" wide) with the screen tucked under so that the tile will now be slightly higher than the new aluminum, allowing the water to flow out. Any thoughts (other than windows)? Thanks! Unfortunately I can't try my "fix" until January when I return.

Here might be an easier solution-
http://www.ezlanaidrain.com/E-Z_Lana...s/Welcome.html

Just Google lanai drains, there are other solutions.

ducati1974 08-27-2011 08:25 PM

Bogie shooter- I think I'll promote you to Birdie shooter! Thanks for the info. I've checked out that lanai drain and my only problem is that now that the floor is tiled the aluminum is only about 1/2-5/8" high on the inside so I don't think their covers will work unless I just make a slot on the inside and install the covers on the outside where the aluminum is still 1" high. At any rate I have sent them an email for more info/advise. Thanks again!

borjo 08-27-2011 08:36 PM

My husband drilled holes in the aluminum at floor level so it would drain out.

getdul981 08-28-2011 06:30 AM

I wonder what keeps water and critters from collecting inside the channel itself. You cut the holes all the way through the channel, but you only put a screen on the inside. That leaves the outside open to critters coming in and the water may not go al the way out, but may collect inside the channel.

ducati1974 08-28-2011 07:57 AM

Quote:

Originally Posted by getdul981 (Post 387305)
I wonder what keeps water and critters from collecting inside the channel itself. You cut the holes all the way through the channel, but you only put a screen on the inside. That leaves the outside open to critters coming in and the water may not go al the way out, but may collect inside the channel.

I wondered about the water sitting inside the channel too, possibly causing mildew or? In my case I'd have to put the screen on the outside because the channel is no longer the full height on the inside. At least I wouldn't have the critter problem.

Ooper 08-28-2011 09:00 AM

Looked at their website but no where does it tell where to purchase them or how much they cost. Anybody know?

ducati1974 08-28-2011 09:34 AM

Quote:

Originally Posted by Ooper (Post 387349)
Looked at their website but no where does it tell where to purchase them or how much they cost. Anybody know?

I sent them an email, I'll post when they reply.

Bogie Shooter 08-28-2011 10:14 AM

Quote:

Originally Posted by ducati1974 (Post 387196)
Anyone else have a problem with rain blowing thru the screens and pooling in the lanai? It seems to be worse now that we have tiled the floor. Possibly it seeped under the bottom aluminum rail before, but now is dammed by the rail. I'm thinking about removing that bottom rail and instead installing flat aluminum stock (1/4" thick by 2" wide) with the screen tucked under so that the tile will now be slightly higher than the new aluminum, allowing the water to flow out. Any thoughts (other than windows)? Thanks! Unfortunately I can't try my "fix" until January when I return.

I finally found the card that a neighbor gave to me after she had lanai drains installed by a guy here in TV.
With all the delete not delete discussion going, I will PM you with the telephone number. (Don't want to upset anybody)

Ooper 08-28-2011 08:31 PM

Thanks... I contacted the info per their website but it didn't seem to take it.

annmarie 08-30-2011 02:55 PM

sounds like a good product
 
has anyone used these drains, how did you like them and where can we get them?

Bogie Shooter 08-30-2011 03:08 PM

My neighbor had this guy install a similiar drain on her lanai, she seems to think they are working. Other than that I know nothing about this man other than he is a Villager.
BJ's Service
352-259-2744 or 352-454-6448
Free Demonstration.

TamLeigh 06-02-2012 09:05 AM

Does anyone have the information and contact numbers for this person who installs lanai drains? Thanks in advance!!

buzzy 06-02-2012 10:16 AM

Quote:

Originally Posted by ducati1974 (Post 387321)
I wondered about the water sitting inside the channel too, possibly causing mildew or? In my case I'd have to put the screen on the outside because the channel is no longer the full height on the inside. At least I wouldn't have the critter problem.

What looks like a box channel is probably open on the bottom, so draining is not an issue. That's the way the screen frames are made for our condo down south. No reason to believe that The Villages builders use anything else.

graciegirl 06-02-2012 10:20 AM

Quote:

Originally Posted by Bogie Shooter (Post 387210)
Here might be an easier solution-
E-Z Lanai Drains

Just Google lanai drains, there are other solutions.

Our neighbor had a little screened thing inserted into her bottom metal support. Sweetie was telling me about it. This might be what it is.


All times are GMT -5. The time now is 12:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.32 (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.