Talk of The Villages Florida
Page 2 of 4 1 2 3 4
Show 40 post(s) from this thread on one page

Talk of The Villages Florida (https://www.talkofthevillages.com/forums/)
-   The Villages, Florida, General Discussion (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/)
-   -   How does one hang a metal ornamental piece on the outside vinyl panels? (https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/how-does-one-hang-metal-ornamental-piece-outside-vinyl-panels-319422/)

TheLawnKing 05-09-2021 06:54 AM
I'd never screw directly into the vinyl siding. You have two options:
1) The vinyl siding hooks that everyone has been mentioning, or
2) if the metal hanging is relatively light, buy some heavy duty magnets on Amazon, stick them behind the vinyl siding, in the metal hanging will be supported by the magnetic field.
I recently used the magnet trick. It took a little time, but it was absolute best way of doing the job.

Buckeye Bleau 05-09-2021 07:02 AM
The answer to the question seriously resides in how heavy the item is. If heavy as in 10# or more, as someone said locate the studs. Other than that u may be able to find Command hooks that will work. Get the outdoor version.
Outdoor 2-Pack Slate Adhesive Wire Hook (2-lb Capacity) https://www.lowes.com/pd/Command-2-P...ook/1000028617

graciegirl 05-09-2021 07:07 AM
How to Hang Things on Vinyl Siding Without Making Holes - YouTube

Larchap49 05-09-2021 07:18 AM
Hooks for vinyl siding
 
Quote:
Originally Posted by Ben Franklin (Post 1941313)
I've searched the internet for the correct way to hang a metal ornament on the vinyl siding inside our lanai, but didn't see anything worthwhile. Any suggestions? Thanks.
Do not put holes in the vinyl. Amazon has hooks for holeless hanging. They push up under the sliding panels and work very well. Spars h as them but only in large size. Putting holes in your siding will let water behind it, not a good idea

BigHoss18 05-09-2021 07:28 AM
Vinyl siding hooks. They hold very well and can be slid left and right easily for adjustment. Use multiple hooks for heavier artwork. Search Amazon.

willbush 05-09-2021 07:36 AM
Quote:
Originally Posted by Ben Franklin (Post 1941313)
I've searched the internet for the correct way to hang a metal ornament on the vinyl siding inside our lanai, but didn't see anything worthwhile. Any suggestions? Thanks.
We have metal are hanging at entrance of our home and along wall of extended lanai using special hooks from ACE with is for hanging objects to vinyl siding up to 50 lbs; there are several but the one you want is the one that slides under vinyl in slit; the one that works best has this on the code 8 52463 00102. They work great without damaging your vinyl

PugMom 05-09-2021 07:39 AM
Quote:
Originally Posted by VIN574 (Post 1941335)
great idea! thx for sharing-have just ordered some :coolsmiley:

1couple 05-09-2021 07:56 AM
Buy a stud finder at any hardware store there under 25$

Dgodin 05-09-2021 08:02 AM
ACE hanger for siding
 
Quote:
Originally Posted by Debfrommaine (Post 1941316)
ACE Hardware sells a special hook, won't damage the vinyl.
The no hole hook. The model I have has a 5lb limit per hook.

Parnell 05-09-2021 08:02 AM
Go to Ace hardware. They sell hooks that go on siding. They come in several sizes depending on the weight of the object. They seem to be the only place that has them. Good luck.

spjvette 05-09-2021 08:04 AM
Make sure your metal wall hanging is clear coated to keep it from rusting.

Kinslow 05-09-2021 08:22 AM
You can buy clips on Amazon that slide up under the siding. No screws or holes. Holds up to 18 lbs.

gwenhwalker@yahoo.com 05-09-2021 08:31 AM
You can purchase metal hangars that attach in the groove without puncturing the vinyl. I think I got mine from Ace

meridian5850 05-09-2021 08:32 AM
Quote:
Originally Posted by Ben Franklin (Post 1941313)
I've searched the internet for the correct way to hang a metal ornament on the vinyl siding inside our lanai, but didn't see anything worthwhile. Any suggestions? Thanks.
There are special siding hooks that you can buy at hardware stores, Lowe's, Home Depot, Amazon and the like.

They were invented by my cousin about 20 years ago. He was a home builder and homeowners were constantly asking him how to hang decorations on vinyl sided homes and there was nothing unless you wanted to void the siding warranty.

He invented and marketed these hooks and quit building homes.

US6932310B1 - Vinyl siding bracket and method of installation
- Google Patents

roob1 05-09-2021 08:33 AM
So really no way of not drilling through the ceiling vinyl it seems.


Quote:
Originally Posted by MandoMan (Post 1941490)
Some vinyl panels on lanai ceilings are attached to OSB (oriented strand board sheathing, a bit like plywood), while in many places the vinyl is nailed to the rafters or roof trusses. If I’m hanging anything at all heavy from a ceiling, I want it to go directly into a rafter or truss, and I want a screw made for that that won’t easily pull out. Where are these trusses? Sometimes you can tell by looking for faintly discernible lines where the vinyl is attached to the trusses, but not always. If the vinyl is attached to the trusses and not at random to OSB, then you can easily find it with a stud finder, as there will be a line of nails every few inches. However, most people would need a ladder, electric drill, and electric screwdriver for this. Someone at Lowe’s or Home Depot can help you get the right screw.


All times are GMT -5. The time now is 07:28 PM.
Page 2 of 4 1 2 3 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.32 (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.