Yamaha Drive Headlights

Closed Thread
Thread Tools
  #1  
Old 08-09-2009, 09:24 AM
charlie49 charlie49 is offline
Member
Join Date: Feb 2009
Posts: 82
Thanks: 0
Thanked 2 Times in 2 Posts
Default Yamaha Drive Headlights

Does anyone know how to adjust the headlights on the Yamaha Drive? One of mine is definitely too high.

Charlie
  #2  
Old 08-09-2009, 10:30 AM
golf2140 golf2140 is offline
Platinum member
Join Date: May 2009
Location: Bonita
Posts: 1,871
Thanks: 1
Thanked 25 Times in 12 Posts
Default

Charlie,

If you find an answer to your question, let me know.

Golf
  #3  
Old 08-09-2009, 01:46 PM
Indy-Guy Indy-Guy is offline
Gold member
Join Date: May 2007
Posts: 1,045
Thanks: 0
Thanked 106 Times in 45 Posts
Default

I have a Yahama Drive and to adjust the headlights take a small screwdriver and insert it above the light and gently pull down. Yes it moves up and down.
Very easy to do.
__________________
Anderson Indiana---Indianapolis Indiana--- Village of Poinciana Full Time
  #4  
Old 01-19-2012, 01:08 PM
Roger Goodman Roger Goodman is offline
Junior Member
Join Date: Jan 2012
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default Headlight adjustment on Yamaha Drive golf cart

On Later Yamaha Drive golf carts, one has to remove the entire headlight assembly and loosen the four Phillips head screws on both sides of the headlight. In most cases, the headlights will need a nearly maximum downward tilt to achieve normal forward illumination.

Roger
  #5  
Old 01-19-2012, 02:31 PM
Bill-n-Brillo's Avatar
Bill-n-Brillo Bill-n-Brillo is offline
Sage
Join Date: Sep 2010
Location: Granville, OH.....and TV snowflakes!
Posts: 6,905
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by Roger Goodman View Post
On Later Yamaha Drive golf carts, one has to remove the entire headlight assembly and loosen the four Phillips head screws on both sides of the headlight. In most cases, the headlights will need a nearly maximum downward tilt to achieve normal forward illumination.

Roger
Ours is a 2011 - that's how I adjusted one of ours that needed it.

Remove the two screws on the front of the outer bezel then the entire assembly will pull forward and come out. Don't over-tighten those two when you're all done - they're only threading into the plastic body.

Bill
Closed Thread


You are viewing a new design of the TOTV site. Click here to revert to the old version.

All times are GMT -5. The time now is 09:39 AM.