[theroar]

Need a recommendation for someone to repair my garage door opener, door will go up but opener won't activate to close.

[RICH1]

Is one of your springs broken?

[retiredguy123]

Ryan O'Cull, 352-207-5668, or
Scott Cowan, 352-697-0321

[villagetinker]

This is usually a problem with the sensors. I have seen this at least 6 times at neighbors homes. The installers just twist the wires together at the sensors, and maybe some tape. The problem is that these connections fail over time. I replace these with a crimped comnnection. Take a look at the lights on the sensors, also most garage door openers will show a code (blinking LED or LEDs), you will need the instruction manual to decode, but this will tell you the problem. I am currently very busy with home projects, but if you have a friend that knows how to make crimped connections have these redone and see if it fixes your problem.

[Michael G.]

Also check to see if anything is obstructing the sensors.
It doesn't take much to interfere with them

[thevillages2013]

Originally Posted by theroar

Need a recommendation for someone to repair my garage door opener, door will go up but opener won't activate to close.

Don’t know if you realize this but this post ended up in the golf course conditions category

[dewilson58]

Originally Posted by retiredguy123

Ryan O'Cull, 352-207-5668, or
Scott Cowan, 352-697-0321

[McGyver9]

Also could be as simple as one of the sensors being inadvertently bumped/bracket bent out of alignment.

[willieboy2110]

try another opener first

[theroar]

Thanks

[remarks006]

Ask for randy

[DaleDivine]

Is your garage door on a golf course??
Might want to ask this in another forum...

[vickersbond]

Originally Posted by theroar

Need a recommendation for someone to repair my garage door opener, door will go up but opener won't activate to close.

New Image Ventures 352-383-7368

[rsmurano]

Happened to me multiple times. The sensor got either bumped out of alignment, the wire came undone, dirty, or something is in its way.

[rogerrice60]

I had similar problem, the wall controller was bad & hadvto be replaced.