VoIP telephones ?

Reply
Thread Tools
  #1  
Old 04-01-2025, 05:14 PM
NYBob NYBob is offline
Member
Join Date: Jan 2024
Posts: 39
Thanks: 1
Thanked 14 Times in 8 Posts
Default VoIP telephones ?

My mother's Assisted Living Facility is using VoIP telephones. I'm not very familiar with these. Her phone is a large corded base unit. I'd like to swap it out for a cordless model. How could I go about doing this ? Can I just connect the new phone, or does it need to be programed in any way ? Both phones will be from the same company.


Current phone...
SIP-T30P - Single line entry level IP phone | Yealink

Cordless...
W73H - Professional Business DECT Phone System | Yealink
  #2  
Old 04-01-2025, 05:40 PM
retiredguy123 retiredguy123 is offline
Sage
Join Date: Feb 2016
Posts: 17,016
Thanks: 2,963
Thanked 16,213 Times in 6,373 Posts
Default

A phone is a phone. Just swap it out and it should work. Usually, these cordless units come with a base unit that connects to a phone jack and several slave units that just connect to a power outlet. If the current phone connects to a phone jack, then the cordless unit must also connect to a phone jack. For less than $100, you can buy a master unit and 4 slave units. That way, you can have 5 phones, one in every room. Panasonic and AT&T are typically brands that are sold at Best Buy or Amazon.
  #3  
Old 04-01-2025, 07:21 PM
NYBob NYBob is offline
Member
Join Date: Jan 2024
Posts: 39
Thanks: 1
Thanked 14 Times in 8 Posts
Default

Quote:
Originally Posted by retiredguy123 View Post
A phone is a phone. Just swap it out and it should work. Usually, these cordless units come with a base unit that connects to a phone jack and several slave units that just connect to a power outlet. If the current phone connects to a phone jack, then the cordless unit must also connect to a phone jack. For less than $100, you can buy a master unit and 4 slave units. That way, you can have 5 phones, one in every room. Panasonic and AT&T are typically brands that are sold at Best Buy or Amazon.

No, there's no phone jack. These VoIP phones connect via Ethernet. Looks like a Cat6/7 cable. They work over the internet.
  #4  
Old 04-01-2025, 07:29 PM
retiredguy123 retiredguy123 is offline
Sage
Join Date: Feb 2016
Posts: 17,016
Thanks: 2,963
Thanked 16,213 Times in 6,373 Posts
Default

Quote:
Originally Posted by NYBob View Post
No, there's no phone jack. These VoIP phones connect via Ethernet. Looks like a Cat6/7 cable. They work over the internet.
It looks like you can buy an ethernet to phone jack adapter from Amazon for about 10 dollars.
  #5  
Old 04-01-2025, 07:35 PM
villagetinker's Avatar
villagetinker villagetinker is offline
Sage
Join Date: Sep 2013
Location: Village of Pinellas
Posts: 10,982
Thanks: 3
Thanked 8,052 Times in 2,928 Posts
Default

Quote:
Originally Posted by NYBob View Post
My mother's Assisted Living Facility is using VoIP telephones. I'm not very familiar with these. Her phone is a large corded base unit. I'd like to swap it out for a cordless model. How could I go about doing this ? Can I just connect the new phone, or does it need to be programed in any way ? Both phones will be from the same company.


Current phone...
SIP-T30P - Single line entry level IP phone | Yealink

Cordless...
W73H - Professional Business DECT Phone System | Yealink
You will need to call the phone provider, but you should be able to swap out the unit, for a cordless type. There will still be a BASE unit required, and there may be some form of activation required. I did a quick look at the instructions for the unit you have and did NOT see any jacks for adding a wireless unit. I did not notice if an additional WIRELESS phone could be added.
__________________
Pennsylvania, for 60+ years, most recently, Allentown, now TV.
  #6  
Old 04-01-2025, 07:56 PM
retiredguy123 retiredguy123 is offline
Sage
Join Date: Feb 2016
Posts: 17,016
Thanks: 2,963
Thanked 16,213 Times in 6,373 Posts
Default

Quote:
Originally Posted by villagetinker View Post
You will need to call the phone provider, but you should be able to swap out the unit, for a cordless type. There will still be a BASE unit required, and there may be some form of activation required. I did a quick look at the instructions for the unit you have and did NOT see any jacks for adding a wireless unit. I did not notice if an additional WIRELESS phone could be added.
Personally, I don't think you need to call the phone provider or do any activation. I think you need to get an ethernet to phone jack adapter, and connect a base unit to the phone jack. I would not use the current unit that you have, but buy a Panasonic or AT&T system with a base unit and several cordless auxiliary units. I could be wrong, but I think it will work fine. My opinion.
  #7  
Old 04-01-2025, 08:20 PM
CarlR33 CarlR33 is offline
Veteran member
Join Date: Dec 2023
Location: Newell the place to be in the South
Posts: 837
Thanks: 610
Thanked 596 Times in 310 Posts
Default

Might also ask the assisted living people as I’m sure your not the only one at the home to consider this?
__________________
I will say the things that others are probably thinking but afraid to say.
  #8  
Old 04-01-2025, 08:37 PM
phylt phylt is offline
Senior Member
Join Date: Nov 2013
Posts: 182
Thanks: 235
Thanked 381 Times in 101 Posts
Default

Quote:
Originally Posted by retiredguy123 View Post
Personally, I don't think you need to call the phone provider or do any activation. I think you need to get an ethernet to phone jack adapter, and connect a base unit to the phone jack. I would not use the current unit that you have, but buy a Panasonic or AT&T system with a base unit and several cordless auxiliary units. I could be wrong, but I think it will work fine. My opinion.
You're not wrong - exactly right. We have VoIP - OOMA. Have it for 8 years, only pay Fed tax each month - like $8.

We have a Panasonic base unit to ethernet/internet connector and 3 cordless phones-remotes around the house. Works great. We use as a backup to our cell phones.
  #9  
Old 04-02-2025, 04:49 AM
arbajeda arbajeda is offline
Senior Member
Join Date: May 2018
Location: Fenney
Posts: 162
Thanks: 49
Thanked 129 Times in 66 Posts
Default

A VOIP phone is essentially a computer. There is no RJ11 connection (old-school phone jack), but an RJ45 (ethernet) connection. You will see the difference if you unplug the cord; there are four pins on the RJ11 and eight on the RJ45. Google search "VOIP phones for home" and you should find what you are looking for. I suggest Amazon, since her service provider might not allow devices not their own.
  #10  
Old 04-02-2025, 05:06 AM
BrianL99 BrianL99 is offline
Sage
Join Date: Dec 2021
Posts: 3,262
Thanks: 296
Thanked 3,267 Times in 1,262 Posts
Default

Quote:
Originally Posted by NYBob View Post
My mother's Assisted Living Facility is using VoIP telephones. I'm not very familiar with these. Her phone is a large corded base unit. I'd like to swap it out for a cordless model. How could I go about doing this ? Can I just connect the new phone, or does it need to be programed in any way ? Both phones will be from the same company.


Current phone...
SIP-T30P - Single line entry level IP phone | Yealink

Cordless...
W73H - Professional Business DECT Phone System | Yealink
Quote:
Originally Posted by phylt View Post
You're not wrong - exactly right. We have VoIP - OOMA. Have it for 8 years, only pay Fed tax each month - like $8.

We have a Panasonic base unit to ethernet/internet connector and 3 cordless phones-remotes around the house. Works great. We use as a backup to our cell phones.
The OP is not asking if the phone will work on a VOIP system. Yes, most any phone can work on a VOIP system, with the proper "adaptor".

The OP is asking if the phone will work, with a proprietary, business phone system (that just happens to use VOIP). It's not the same thing as plugging a phone into a telephone jack or ethernet jack, to access VOIP lines that someone like Xfinity has provided to your home.

The answer to the question, is "yes" with some reservations. All functions of the system may not be available. Some modicum of "programming" may be necessary, depending on the functions the Assisted Living Facility has programmed into their system.

Yealink is one of the premier providers of commercial phone systems. When you plug the phone into the system, the phone should update automatically, with the compatible software. Some functions may not be available, without some modicum of simple "programming". [This from the Yealink website]
Attached Thumbnails
The Villages Florida: Click image for larger version

Name:	Phones.jpg
Views:	656
Size:	41.1 KB
ID:	107941  
__________________
God made me and gave me the right to remain silent, but not the ability. Sen John Kennedy (R-La)
  #11  
Old 04-02-2025, 05:54 AM
Caymus Caymus is online now
Gold member
Join Date: Mar 2019
Posts: 1,213
Thanks: 22
Thanked 1,105 Times in 538 Posts
Default

Is forwarding the calls to a cell phone a simple option? Maybe interim?
  #12  
Old 04-02-2025, 06:19 AM
JoelJohnson JoelJohnson is offline
Veteran member
Join Date: Jun 2012
Location: Lady Lake, FL
Posts: 943
Thanks: 722
Thanked 476 Times in 227 Posts
Default

I've converted someone with, what they thought of as a "land line". What they REALLY had was a Comcast modem with a phone jack, they had the 3 deal (internet, TV and phone), to OOMA. OOMA replaces the need for a Comcast modem with a phone line. However, we had to notify Comcast that they were going to OOMA (took a few days). When they transferred the number to OOMA we just had to set it up. They pay about $8/mo. and they can get their own modem/router (which they could do before anyway) but save on the phone bill.
  #13  
Old 04-02-2025, 06:58 AM
retiredguy123 retiredguy123 is offline
Sage
Join Date: Feb 2016
Posts: 17,016
Thanks: 2,963
Thanked 16,213 Times in 6,373 Posts
Default

Quote:
Originally Posted by BrianL99 View Post
The OP is not asking if the phone will work on a VOIP system. Yes, most any phone can work on a VOIP system, with the proper "adaptor".

The OP is asking if the phone will work, with a proprietary, business phone system (that just happens to use VOIP). It's not the same thing as plugging a phone into a telephone jack or ethernet jack, to access VOIP lines that someone like Xfinity has provided to your home.

The answer to the question, is "yes" with some reservations. All functions of the system may not be available. Some modicum of "programming" may be necessary, depending on the functions the Assisted Living Facility has programmed into their system.

Yealink is one of the premier providers of commercial phone systems. When you plug the phone into the system, the phone should update automatically, with the compatible software. Some functions may not be available, without some modicum of simple "programming". [This from the Yealink website]
I interpreted the OP's post as just wanting to replace a corded phone with a cordless phone.
  #14  
Old 04-02-2025, 07:32 AM
nn0wheremann nn0wheremann is offline
Veteran member
Join Date: Jun 2017
Posts: 859
Thanks: 88
Thanked 333 Times in 238 Posts
Default

Quote:
Originally Posted by NYBob View Post
My mother's Assisted Living Facility is using VoIP telephones. I'm not very familiar with these. Her phone is a large corded base unit. I'd like to swap it out for a cordless model. How could I go about doing this ? Can I just connect the new phone, or does it need to be programed in any way ? Both phones will be from the same company.


Current phone...
SIP-T30P - Single line entry level IP phone | Yealink

Cordless...
W73H - Professional Business DECT Phone System | Yealink
No problem, just swap it out with any cordless phone. Just try to get one that is different from her neighbor's’, to avoid crosstalk. You don’t want a party line.
  #15  
Old 04-02-2025, 07:42 AM
mtdjed mtdjed is offline
Platinum member
Join Date: Jan 2009
Posts: 1,540
Thanks: 1
Thanked 1,239 Times in 433 Posts
Default

Quote:
Originally Posted by arbajeda View Post
A VOIP phone is essentially a computer. There is no RJ11 connection (old-school phone jack), but an RJ45 (ethernet) connection. You will see the difference if you unplug the cord; there are four pins on the RJ11 and eight on the RJ45. Google search "VOIP phones for home" and you should find what you are looking for. I suggest Amazon, since her service provider might not allow devices not their own.
I connected my old phones (Base unit which requires a hard wire signal and 4 satellites to a Magic Jack). Since I wanted the base unit in the kitchen and my router is in the study, I connected my Majic Jack into the router and then into the study phone Jack line which is part the house wiring. That takes the phone signal to my base unit which then connects to the satellite phones. Sounds complex but works great without need to buy new phones.
Reply

Tags
phone, telephones, cordless, voip, connect


You are viewing a new design of the TOTV site. Click here to revert to the old version.

All times are GMT -5. The time now is 09:25 AM.