Microwave installers

Reply
Thread Tools
  #1  
Old 04-15-2024, 02:01 PM
ureout ureout is offline
Veteran member
Join Date: Feb 2010
Posts: 814
Thanks: 4
Thanked 539 Times in 159 Posts
Default Microwave installers

does anyone know of someone who installs microwaves??
  #2  
Old 04-15-2024, 02:32 PM
retiredguy123 retiredguy123 is offline
Sage
Join Date: Feb 2016
Posts: 14,267
Thanks: 2,351
Thanked 13,747 Times in 5,255 Posts
Default

Best Buy. I know a few people who bought a new microwave from Best Buy, and they were very satisfied with the installation guys, who, I think were Best Buy employees.

Last edited by retiredguy123; 04-15-2024 at 03:37 PM.
  #3  
Old 04-15-2024, 03:31 PM
villagetinker's Avatar
villagetinker villagetinker is offline
Sage
Join Date: Sep 2013
Location: Village of Pinellas
Posts: 9,682
Thanks: 2
Thanked 6,160 Times in 2,252 Posts
Default

Almost any handyman can install these, especially if the replacement is the same brand as the original. I have done a few, and have run into some problems when switching brands, the units are slightly different sizes, the vent is in a slightly different location and the holes for the mounting screws in the cabinet or the strip on the wall are in different locations. NOTE: if you have a finished backsplash that was installed after the microwave I would strongly suggest staying with the same brand.
In any case, if you have an EXTERNAL vent all of the ones, I installed required changes to be made to swap from INTERNAL circulation to EXTERNAL vent.
__________________
Pennsylvania, for 60+ years, most recently, Allentown, now TV.
  #4  
Old 04-15-2024, 09:38 PM
OrangeBlossomBaby OrangeBlossomBaby is offline
Sage
Join Date: Feb 2015
Posts: 8,545
Thanks: 6,886
Thanked 9,539 Times in 3,115 Posts
Default

Dire Straits got to install microwave ovens, custom kitchens, deliveries. They got to move these refrigerators, they gotta move those color TVs.

(Sorry couldn't help myself)
  #5  
Old 04-16-2024, 02:24 PM
Topspinmo's Avatar
Topspinmo Topspinmo is offline
Sage
Join Date: Dec 2012
Location: Somewhere over the rainbow
Posts: 12,433
Thanks: 6,360
Thanked 4,953 Times in 2,464 Posts
Default

Just done that, what pain, paper template was nightmare, none of old holes lined up including lower bracket. Plus no 2x4s in wall, had to cut down dry wall toggles screws cause they were too long to work. Finely had to make my own template out of cardboard. Major pain. Even with same brand nothing was close to mount new one.
Reply

Tags
microwave, installers, installs, microwaves


You are viewing a new design of the TOTV site. Click here to revert to the old version.

All times are GMT -5. The time now is 12:37 PM.