Hvac--questions to help resolve problems Hvac--questions to help resolve problems - Talk of The Villages Florida

Hvac--questions to help resolve problems

Closed Thread
Thread Tools
  #1  
Old 05-05-2014, 05:24 PM
hvac877 hvac877 is offline
Junior Member
Join Date: May 2014
Location: Oxford Oaks
Posts: 26
Thanks: 16
Thanked 6 Times in 5 Posts
Default Hvac--questions to help resolve problems

I have been in the HVAC trade since 1967. Experience in Commercial Heat, Air Conditioning & Refrigeration. Had my own business from 1999 to 2013.

I have written in to the POA and spoke with several homeowners and helped with their HVAC problems.

If anyone has any questions or problems about their HVAC systems let me know and I will try to get you the correct information.

I live in the Villages and quite familiar with the HVAC equipment and systems.
  #2  
Old 05-05-2014, 07:27 PM
mrfixit mrfixit is offline
Veteran member
Join Date: Oct 2008
Posts: 868
Thanks: 0
Thanked 55 Times in 25 Posts
Default

.
Welcome to Talk of The Villages hvac877.

Hope you enjoying the Villages Lifestyle as much as we do.

Thank You for your neighborly gesture to offer advice on
HVAC issues.

You are a perfect fit for "'Florida's Friendliest Hometown.
  #3  
Old 05-05-2014, 07:29 PM
golf2140 golf2140 is offline
Platinum member
Join Date: May 2009
Location: Bonita
Posts: 1,871
Thanks: 1
Thanked 26 Times in 13 Posts
Default

Welcome to TV and thank you for the offer.
__________________
Villager from 2000 until they take me out in a small box!!!
  #4  
Old 08-26-2014, 09:12 PM
lopheim lopheim is offline
Junior Member
Join Date: Feb 2012
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Question Question for HVAC877

Original HVAC installed in 2002. Yearly maintenance service indicated low coolant. Told it will take 4-5 lbs at $70/lb and could leak out very quickly, as there is high probability of a leak somewhere. We keep air around 78-79 degrees in house and unit seems to be cooling okay (maybe running a bit longer). Should we invest in new unit or wait until this one fails and then purchase?
  #5  
Old 08-26-2014, 09:33 PM
CFrance's Avatar
CFrance CFrance is offline
Sage
Join Date: Dec 2011
Location: Tamarind Grove/Monpazier, France
Posts: 14,705
Thanks: 390
Thanked 2,131 Times in 877 Posts
Default

I have a question too. Is there anything one can install on these brand-new all electric HVAC systems that will cut down on dust in the house? Other than a thick filter. We had electronic air cleaners on our gas furnaces up north.
__________________
It's harder to hate close up.
  #6  
Old 08-26-2014, 09:40 PM
tommy steam tommy steam is offline
Gold member
Join Date: Dec 2011
Location: New York, Georgia , Arizona, Vietnam 66 67
Posts: 1,358
Thanks: 0
Thanked 6 Times in 6 Posts
Default

Quote:
Originally Posted by lopheim View Post
Original HVAC installed in 2002. Yearly maintenance service indicated low coolant. Told it will take 4-5 lbs at $70/lb and could leak out very quickly, as there is high probability of a leak somewhere. We keep air around 78-79 degrees in house and unit seems to be cooling okay (maybe running a bit longer). Should we invest in new unit or wait until this one fails and then purchase?
Did the tec who quoted you the price take a leak detector and check you system out? They do have electronic tools to find leaks.
  #7  
Old 08-27-2014, 05:34 AM
Papa Cuma Papa Cuma is offline
Member
Join Date: Aug 2014
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by lopheim View Post
Original HVAC installed in 2002. Yearly maintenance service indicated low coolant. Told it will take 4-5 lbs at $70/lb and could leak out very quickly, as there is high probability of a leak somewhere. We keep air around 78-79 degrees in house and unit seems to be cooling okay (maybe running a bit longer). Should we invest in new unit or wait until this one fails and then purchase?

Unless your unit was undercharged from it's initial installation you do in fact have a leak. There are several methods that can be used to find the leak. Any good tech can visually spot a leak ( oil trail ) if the leak is substantial. Another would be electronic detection, would take no more than an hour ( assuming the leak source is not under your slab ) Cost of this service including recovery and recharge of the unit would be minimal compared to installing new equipment. But of course everything I mentioned hinges on the quality and proficiency of the technician.
I am a professional HVAC tech with no dog in this fight.
  #8  
Old 08-27-2014, 06:38 AM
leftyf leftyf is offline
Gold member
Join Date: Mar 2013
Posts: 1,008
Thanks: 101
Thanked 70 Times in 33 Posts
Default

The outside unit to my AC is inside a corner of my birdcage. As an experiment, I stretched a piece of awning about 4 ft above the unit to shade the unit. I bought 2 cheap thermometers and placed one on the center motor section of the AC and the other about 4 ft away in the direct sun. The temperature difference was about 20 degrees, being cooler over the AC unit. My question to you would be, does this make my AC run more efficiently? I am thinking of having a permanent aluminum awning installed over the AC and would appreciate your input before I spend the money.
  #9  
Old 08-27-2014, 07:40 AM
Papa Cuma Papa Cuma is offline
Member
Join Date: Aug 2014
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Yours is an interesting question but the execution of the experiment I'm afraid is flawed. The 20 degree difference in temperature you measured was the result of radiation plus ambient temperature. To make the experiment valid you would need to place the thermometer approximately 3" from the condenser coil half way up with the outside fan running with the condenser shielded from the solar source. Compare that result with the condenser unshielded but the thermometer shielded from the solar source. This will give you an accurate temperature differential.
That being said, there is an efficiency increase with cooler air passing through the condenser coil and it can be measured by placing an amprobe (current sensing device) across the run terminal wire of the compressor. A decrease in ambient temperature will cause a decrease in the amperage draw of the compressor thereby increasing its measurable efficiency ( assuming all other factors remain equal) I hope this gives you some more food for thought.
Of course you will need to factor in your expenditure compared with the cost saving which can only be measured with knowing the decrease in power usage times the run hours of the compressor times the cost per watt.
  #10  
Old 08-28-2014, 06:42 AM
leftyf leftyf is offline
Gold member
Join Date: Mar 2013
Posts: 1,008
Thanks: 101
Thanked 70 Times in 33 Posts
Default

Thanks Papa, but you just went waaaay over my head.
  #11  
Old 08-28-2014, 06:47 AM
CFrance's Avatar
CFrance CFrance is offline
Sage
Join Date: Dec 2011
Location: Tamarind Grove/Monpazier, France
Posts: 14,705
Thanks: 390
Thanked 2,131 Times in 877 Posts
Default

I'm wondering what happened to the OP, hvac877. He offered to answer questions, but he hasn't been back on to answer any.
__________________
It's harder to hate close up.
  #12  
Old 08-28-2014, 07:18 AM
Papa Cuma Papa Cuma is offline
Member
Join Date: Aug 2014
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by leftyf View Post
Thanks Papa, but you just went waaaay over my head.

In short, save your money. No discernible difference in cost saving. [emoji2]
Closed Thread


You are viewing a new design of the TOTV site. Click here to revert to the old version.

All times are GMT -5. The time now is 06:05 AM.