[jayerose]

Good morning,

Lowes and Home Depot do not cut boards less than 12".

Does anyone know where we can get a small board cut?

thank you!

[Bill32]

Take it to the Villages woodshop on Rolling acres rd maybe?

[CWGUY]

Originally Posted by Bill32

Take it to the Villages woodshop on Rolling acres rd maybe?

Might want to call first..... don't know if it's true but heard they did a temp. stop of that program because of Covid.

[villagetinker]

Originally Posted by jayerose

Good morning,

Lowes and Home Depot do not cut boards less than 12".

Does anyone know where we can get a small board cut?

thank you!

I may be able to help you, I have a band saw and power hand saw, no table saw, so depending on how you need the boards cut, let me know. Also you would need to bring the boards to me.

[jayerose]

I have a board 21x10 which I need cut 1/2 so there are two boards, 21x5 and another board 14x8 which I need cut to 10.5x6

[villagetinker]

Originally Posted by jayerose

I have a board 21x10 which I need cut 1/2 so there are two boards, 21x5 and another board 14x8 which I need cut to 10.5x6

Assuming that your final cut dimensions are 'close' and NOT exact, I can cut your wood, my point is that the saw blade is 1/16 to 1/8 wide, so the cut in half pieces would be 1/32 to 1/16 inch smaller than you state.

[jayerose]

That would be fine!

[villagetinker]

Send me a PM with your phone number so we can get together.

[JoelJohnson]

Originally Posted by villagetinker

Assuming that your final cut dimensions are 'close' and NOT exact, I can cut your wood, my point is that the saw blade is 1/16 to 1/8 wide, so the cut in half pieces would be 1/32 to 1/16 inch smaller than you state.

Find the center of the board (put a straight edge from corner to corner and mark a line near the center (use tape if you don't want to mark up the board), then do the same this the other way. Assuming the board is square, put a piece of printer paper against the edge and mark the center on the paper and then move the paper to the top of the board and mark it there. If you center the blade to cut on the line it should be pretty close to even.

[Eg_cruz]

Originally Posted by jayerose

Good morning,

Lowes and Home Depot do not cut boards less than 12".

Does anyone know where we can get a small board cut?

thank you!

Home Depot has a place in the store that you can use to cut what ever you need. They have different saw and measuring tape. I use it all the time

[jswirs]

Originally Posted by jayerose

Good morning,

Lowes and Home Depot do not cut boards less than 12".

Does anyone know where we can get a small board cut?

thank you!

I can do it for you. I'm in Stonecrest and I have a table saw. However, I cannot guarantee EXACT dimensions, but should be within 1/32 - 1/16 of an inch.

[Girlcopper]

Originally Posted by Eg_cruz@comcast.net

Home Depot has a place in the store that you can use to cut what ever you need. They have different saw and measuring tape. I use it all the time

Great. I didnt know that. I had asked to have wood cut too and they said no.

[Paporter]

Originally Posted by jayerose

Good morning,

Lowes and Home Depot do not cut boards less than 12".

Does anyone know where we can get a small board cut?

thank you!

The Villages Woodworkers Club, has a shop on Rolling Acres, and will cut the wood for you.

[RoadToad]

Originally Posted by Eg_cruz@comcast.net

Home Depot has a place in the store that you can use to cut what ever you need. They have different saw and measuring tape. I use it all the time

The DIY saw at HD (or Lowes) is not adequate for a rip cut; which is what the OP is describing.
I have table saw and chop saws.
Let me know if I can help.

[garyrudkin]

We are in Lake Deaton if you want to stop by to get it cut. Text or call 405-763-1467.