Good morning, I recently purchased a 2024 Quiettech.
The side mirrors will not stay adjusted (moving around on bumps or in the wind)
Does anyone know how to tighten them?

[dewilson58]

Originally Posted by Wenham

Good morning, I recently purchased a 2024 Quiettech.
The side mirrors will not stay adjusted (moving around on bumps or in the wind)
Does anyone know how to tighten them?

Underneath. Mine is where the mount connects to the mirror.

Thank You, I will try that right now

Thanks again, it is kind of a weird design having to use tools to adjust the mirror.
Very inconvenient when my wife drives.
Oh well

[dewilson58]

Originally Posted by Wenham

Thanks again, it is kind of a weird design having to use tools to adjust the mirror.
Very inconvenient when my wife drives.
Oh well

should not need tool to "adjust mirror".

don't over tighten it............should be snug, but yet able to adjust mirror.

Mine has a nut that needs to be tightened

[dewilson58]

Originally Posted by Wenham

Mine has a nut that needs to be tightened

yep, me too

but it's not a normal nut to tighten

the nut pulls down the bolt to snug up the base off the mirror against some rubber.

but if you're happy, all good.

Do you tighten yours by hand?

[dewilson58]

wrench, but hand

it's a fine line how tight

Understood

[villagetinker]

Originally Posted by Wenham

Good morning, I recently purchased a 2024 Quiettech.
The side mirrors will not stay adjusted (moving around on bumps or in the wind)
Does anyone know how to tighten them?

First, I would go back to the dealer and have them look at the mirrors, and if that does not work, several of the above comments are suitable. I have had to slightly modify some mirrors that would not hold position the adjustment was either too loose or too tight. I found that taking the mirror apart and installing peel and stick felt pads worked very well.

[KennyP]

Its a common issue and simple fix, Most mirrors are 10 or 12 mm nut right under the mirror, A deep socket and 30 seconds of your time and its fixed. Just have to make it snug so you can still adjust. super simple fix.

[dewilson58]

Originally Posted by KennyP

Its a common issue and simple fix, Most mirrors are 10 or 12 mm nut right under the mirror, A deep socket and 30 seconds of your time and its fixed. Just have to make it snug so you can still adjust. super simple fix.

I wish I'd said that.

[Diver]

This is a known issue with these mirrors. If you can't get them to stay in place have them replaced. If you bought it at VGC you can probably have it done under warranty.

[jojoturf]

Take it back to dealer!