Adjust the lie Adjust the lie - Talk of The Villages Florida

Adjust the lie

Closed Thread
Thread Tools
  #1  
Old 01-14-2012, 03:34 AM
The Villager II's Avatar
The Villager II The Villager II is offline
Gold member
Join Date: Jul 2011
Location: Duval, The Villages, Florida
Posts: 1,339
Thanks: 0
Thanked 1 Time in 1 Post
Default Adjust the lie

Who is best at adjusting the lie on clubs in the area? Thanks for any suggestions.
  #2  
Old 01-14-2012, 07:21 AM
The Villager II's Avatar
The Villager II The Villager II is offline
Gold member
Join Date: Jul 2011
Location: Duval, The Villages, Florida
Posts: 1,339
Thanks: 0
Thanked 1 Time in 1 Post
Default

bump. Anyone have name or location of a club repair that does lie angle adjustments?
  #3  
Old 01-14-2012, 07:33 AM
getdul981's Avatar
getdul981 getdul981 is offline
Platinum member
Join Date: May 2010
Location: Roanoke, VA - Pennecamp - St. James
Posts: 1,929
Thanks: 0
Thanked 1 Time in 1 Post
Default

Just tell the truth to begin with and you won't need any adjustment.

That's my story and I'm stickin' to it.
__________________
Greg

A pessimist is an optimist with experience.

"In my many years I have come to a conclusion that one useless man is a shame, two is a law firm and three or more is a congress." - John Adams
  #4  
Old 01-14-2012, 07:40 AM
waynet waynet is offline
Gold member
Join Date: Dec 2009
Posts: 1,131
Thanks: 0
Thanked 51 Times in 32 Posts
Default

I think the guys at Palmer could do it. Just be careful,can only adjust so much before you snap it.
  #5  
Old 01-14-2012, 09:08 AM
graciegirl's Avatar
graciegirl graciegirl is offline
Sage
Join Date: Mar 2008
Posts: 40,170
Thanks: 5,009
Thanked 5,783 Times in 2,004 Posts
Send a message via AIM to graciegirl
Default

Sweeties says the guys at Palmer.
__________________
It is better to laugh than to cry.
  #6  
Old 01-14-2012, 10:16 AM
aln's Avatar
aln aln is offline
Veteran member
Join Date: Dec 2007
Posts: 956
Thanks: 0
Thanked 1 Time in 1 Post
Default

Tree Tops will do it too . . he did mine up 2 degrees . . . of course they were clubs I bought from him!
__________________
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, cigar in one hand, scotch in the other, body thoroughly used up, totally worn out and screaming "WOO HOO what a ride!"
  #7  
Old 01-14-2012, 01:12 PM
Mikeod's Avatar
Mikeod Mikeod is offline
Sage
Join Date: Jun 2008
Location: Caroline
Posts: 5,021
Thanks: 0
Thanked 50 Times in 28 Posts
Default

A lot depends on whether they are cast or forged. Generally, forged clubs can be adjusted more and/or more often. Cast can break if you try to alter them too much. (From experience, unfortunately. ) If they are Ping, I believe the factory will do the adjustment for relatively little, depending on the age of the club. Contact Ping Customer Service to be sure.
  #8  
Old 01-14-2012, 02:04 PM
The Villager II's Avatar
The Villager II The Villager II is offline
Gold member
Join Date: Jul 2011
Location: Duval, The Villages, Florida
Posts: 1,339
Thanks: 0
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by mikeod View Post
A lot depends on whether they are cast or forged. Generally, forged clubs can be adjusted more and/or more often. Cast can break if you try to alter them too much. (From experience, unfortunately. ) If they are Ping, I believe the factory will do the adjustment for relatively little, depending on the age of the club. Contact Ping Customer Service to be sure.
Thanks Mike. I went to Palmer and they said 1 degree only. If I am within one degree, I would just stay where I'm at. Went to Jim's Golf Shop by target and got a full education on clubs. They even gave me a test with my 6 iron and verified that I am making perfect center club contact with the ground. No Charge at all. I would recommend that store for sure. They were honest with me and could have taken my money, but checked me out and sent me on my way with a good feeling about my clubs and no charge.
Closed Thread


You are viewing a new design of the TOTV site. Click here to revert to the old version.

All times are GMT -5. The time now is 08:53 AM.