Talk of The Villages Florida - Rentals, Entertainment & More
Talk of The Villages Florida - Rentals, Entertainment & More
#1
|
||
|
||
Cleaning grungy fiberglass shower
The grunginess of the fiberglass shower insert in the bathroom has been bugging me. I tried the abrasive type cleaners...not much help. I used a power washer (really) and it was a wash. Then I tried toilet bowl cleaner, and it did a super job, but was really hard to apply since it is so thick (tried watering it down for sprayer and little luck). This approach also discolored the metal cover over the drain, bummer.
SUCCESS -- this really works and it is cheap. Half part white vinegar and half part Dawn dish washing liquid. Shake it up and apply it with a sprayer. Let it sit for a hour or two. Then I used a stiff bristle brush on the rougher floor area of the shower and did not brush out the sides. Rinsed and WOW! white again. Such a cheap and totally successful approach. Next I think I'll try it out on the tub and see how it does there. Maybe spray it on the car and rinse, Try it on the siding... who knows where this might go.
__________________
Columbus, IN and Aberdeen Proving Grounds, MD |
|
#2
|
||
|
||
Thanks! I can't wait to try this. I have tried just about everything else with no luck. Hope it works on the doors too!
|
#3
|
||
|
||
I hope the abrasive cleaners did not scratch the fiberglass, or you may have a much bigger problem keeping the shower clean. I made a mistake years ago with a very abrasive cleaner, and ended up with a patch that would get dirty faster then the rest of the tub. I found a really good coating for fiberglass (from a boat store) that I was able to use to reglaze the tub. Sorry I do not recall any details about the coating, too long ago.
__________________
Pennsylvania, for 60+ years, most recently, Allentown, now TV. |
#4
|
||
|
||
Mr. Clean Magic Eraser works well too. I've found it is really works great on the shower floor. Nothing else I tried got it as clean.
|
#5
|
||
|
||
Quote:
|
#6
|
||
|
||
I tried white vinegar on rust on concrete but it didn't work. You think the added dish soap will help?
|
#7
|
||
|
||
We used Scrubbing Bubbles Shower Cleaner on the Floor but used WD40 on the walls and fixtures and it looked like the day it was installed. You have to sacrifice a old comforter by taping it to the base of the shower stall so nobody wipes out if any WD40 contacts the part you stand on. It works like magic on sliding glass doors also. Just be very careful to protect against the slipping factor. I found this cleaning technique on YOUTube. Saved a bundle of money because it looked like the shower stall and the bathtub needed to be replaced before we started.
|
#8
|
||
|
||
Not sure if it would have any impact on a rust stain on concrete... but I do want to try it on the weathering on a concrete slab at our Indiana house when we get back there.
The magic eraser is an interesting idea to try as well.
__________________
Columbus, IN and Aberdeen Proving Grounds, MD |
#9
|
||
|
||
NOT on the car...
Quote:
Thanks for the shower cleaning tip. I'd like to suggest: Having enough automotive detail experience to be dangerous - please do not use the dish soap on your car. Its too harsh and will remove the protective wax finish. Nix the vinegar on the finish too.
__________________
|
#10
|
||
|
||
Yep, probably the car... not a good idea... but, was thinking maybe I should try it out on the white aluminum gutters?
__________________
Columbus, IN and Aberdeen Proving Grounds, MD |
#11
|
||
|
||
White vinegar on grout works good also.Spray it on leave set for half hour and mop the floor.
|
Closed Thread |
|
|