Talk of The Villages Florida - Rentals, Entertainment & More
Talk of The Villages Florida - Rentals, Entertainment & More
#1
|
||
|
||
Aging bird cage framing?
Our bird cage is 15 years old. We had all the screening replaced a couple of years ago.
Now starting to see a lot of rusting screws and a whitening of the bottom rails (not mold...more like calcium deposit). I am not sure painting is a practical option. I am curious what others have done with their aging bird cage frame. ________________________________________________ |
|
#2
|
||
|
||
I had all the rusting screws replaced when I had the screen replaced.
Quote:
I had my screens replaced by Todd's and I had all the rusting screws replaced at the same time. They replaced all the rusting #6 screws with #8. If they couldn't get a screw out they drilled a new hole and put in a new screw. It was a lot of work and they spent a lot more time than planned and they did a great job. |
#3
|
||
|
||
I also had all screws replaces with stainless.
__________________
Village of Hacienda East |
#4
|
||
|
||
Can you share who did the work for you or was it DIY?
|
#5
|
||
|
||
It was about five years ago, and T & D was already working on screen cage.
__________________
Village of Hacienda East |
#6
|
||
|
||
What to put between steel and aluminum
When using stainless steel fasteners with aluminum surfaces, you can prevent corrosion by placing something between the two metals. Plastic or rubber washers or gaskets are good suggestions. Along with corrosion, discoloration of stainless steel may occur when combined with aluminum. This is also called ‘tea staining’. Discoloration can be prevented by the use of insulation and regular maintenance. Passivation can also be used to create the passive film on the fastener for better corrosion resistance. Personally experienced this in the Military with aluminum supperstructure on vessels ALUMINUM SCREES AND RIVETS SHOULD BE USED. |
#7
|
||
|
||
I have concerns about using aluminum screws, everytime I have tried to use these they have sheared or broken off, they do not have the strength of steel or stainless steel. While I am not an expert in metal corrosion I have never seen stainless steel corrode when in contact with aluminum. In any case, I would ask an expert in birdcage design if aluminum screws would be acceptable from a load bearing consideration. Stainless steel screws are available from all of the big box stores in Phillips head, not sure I have seen hex head type. If you are doing a DIY here is what I would do: take existing steel screws out one row at a time, clean any rust stain off (try sno-cap), then dry the area and install new stainless-steel screws. Vinegar or similar weak acid MAY clean the calcium buildup, however if the original anodizing has failed some paint may be required.
I have had very poor luck with painting aluminum that has had a corrosion problem, I would suggest going to a boat repair facility to find out how they repair the paint on aluminum boats. DO NOT EVER use a STEEL tool on aluminum if you intend to paint the aluminum, the paint will fail. Hope this helps.
__________________
Pennsylvania, for 60+ years, most recently, Allentown, now TV. |
#8
|
||
|
||
J and J services 352-702-6376
[QUOTE=billethkid;2173511]Our bird cage is 15 years old. We had all the screening replaced a couple of years ago.
Now starting to see a lot of rusting screws and a whitening of the bottom rails (not mold...more like calcium deposit). I am not sure painting is a practical option. I am curious what others have done with their aging bird cage frame. ________________________________________________ I don't know if you are looking for someone to fix the problem, but if you are, Jeff can fix what ever problems you are having at a very decent price. Call 352-702-6376 |
#9
|
||
|
||
Quote:
|
#10
|
||
|
||
FYI…Google “galvanic corrosion”. Don’t think washers between the fastener head and the aluminum will completely eliminate the problem since the stainless threads will still be in contact with the aluminum structure.
|
#11
|
||
|
||
If the metal is brown, you can clean the whitened build up with acetone and coat it with silicon spray. Really does a good job. It will, however, take a little of the brown paint up. Do not know how to deal with it if it is white.
|
#12
|
||
|
||
This will all but certainly increase the corrosion rate, dissimilar metals, (Especially Stainless and Aluminum) corrode rapidly and seize. |
#13
|
||
|
||
Quote:
|
#14
|
||
|
||
Sherwin Williams has a paint that will work.
Did my bottom rail 3 yrs ago.. still good. |
#15
|
||
|
||
I am wanting to move the outside door of the cage. Is there a company I can call?
|
Closed Thread |
|
|