[tophcfa]

Originally Posted by KennyP

Ill jump in here......the governor adjustment only gives you more speed.
Modification of the secondary clutch will give you more torque....however be aware the newer secondary clutches have a weak point and when stressed will go to failure and you will need a new clutch.

Interesting, last night I ordered a stiffer high torque secondary clutch spring and premium Kevlar drive belt that I plan on installing in our 2022 quiet tech to get better low end torque. Is that going to stress out the secondary clutch or cause some other problems I wasn’t anticipating? FYI, I ordered the mid tourque green colored spring from the Power Equipment Man.

[Topspinmo]

Originally Posted by tophcfa

Interesting, last night I ordered a stiffer high torque secondary clutch spring and premium Kevlar drive belt that I plan on installing in our 2022 quiet tech to get better low end torque. Is that going to stress out the secondary clutch or cause some other problems I wasn’t anticipating? FYI, I ordered the mid tourque green colored spring from the Power Equipment Man.

You probably won’t like Kevlar belt either. I tried gates heavy duty belt and hard to get in and even harder to get off. Plus it had big delay starting out. I could imagine what it was going to do to clutch faces?

[KennyP]

Originally Posted by tophcfa

Interesting, last night I ordered a stiffer high torque secondary clutch spring and premium Kevlar drive belt that I plan on installing in our 2022 quiet tech to get better low end torque. Is that going to stress out the secondary clutch or cause some other problems I wasn’t anticipating? FYI, I ordered the mid tourque green colored spring from the Power Equipment Man.

Chances are good it will. Take a look at the front of the secondary clutch....see if you have 4 rivets or 6rivets holding it on...the 6 one is better but still weak. Remember, you are only as strong as the weakest link.

[tophcfa]

Originally Posted by KennyP

Chances are good it will. Take a look at the front of the secondary clutch....see if you have 4 rivets or 6rivets holding it on...the 6 one is better but still weak. Remember, you are only as strong as the weakest link.

Thanks for the info. What would you recommend as a quality replacement secondary clutch with a much stronger weakest link? Also, will the high torque spring stress out anything else beyond the secondary clutch? Thanks.

[Normal]

Originally Posted by KennyP

Chances are good it will. Take a look at the front of the secondary clutch....see if you have 4 rivets or 6rivets holding it on...the 6 one is better but still weak. Remember, you are only as strong as the weakest link.

22 on has the 6 rivet clutch

[KennyP]

Originally Posted by Normal

22 on has the 6 rivet clutch

They should, but hasnt always been the case.