[SkylightRoofing]

How Can You Determine Quality Roofing Work in The Villages?

There are numerous red flags that could indicate “improper roof replacement work” here in The Villages, ranging from inadequate sheathing to improper shingle installation. So how can you tell if your Villages roofing contractor did a great job? Here are a few things to look for in quality roof work.

1. Hiring A Reputable Roofing Contractor in The Villages

Choosing a qualified Villages roofing contractor like Skylight Roofing is one of the most important decisions you’ll make when perusing a roof installation or having a repair completed on your roof. While contractors differ in terms of experience and services, most qualified roofing contractors share certain similarities. Confirm that your contractor has an established business with a reachable telephone number and business license. A quality contractor should also possess insurance, professional credentials, and a good rating on NextDoor, Talk of the Villages, Google, Trust Pilot, BBB, Etc. Also check to see if the contractor offers a warranty that covers all work and materials. While a low bid may be tempting, you usually get what you pay for.

2. Proper Roof Removal

Before a new roof can be installed, it’s best to remove the old roof completely following county code here in Florida. While some roofing contractors choose to install a new roof over an existing one to save time and money, this shortcut can come with possible consequences. When new shingles are attached directly to new synthetic and plywood rather than the old underlayment, they are far more likely to last longer. It’s wise to choose a contractor who will take the time to get the job done correctly and to “Code” here in The Villages.

3. Adequate Sheathing

Before roof repair or installation can occur, a quality contractor will take the time to mend the roof’s CDX sheathing. Over time, sheathing will likely become loose due to inadequate nails or failure to nail an entire section of sheathing. When the sheathing is not properly nailed down, you may find unsightly buckles forming in the roof over time due to warping. When sheathing is left loose, the nails can pop out, creating holes that cause the shingles to crack of blow off. Nail holes can also lead to leaks. When looking for signs of quality roof work, look for a contractor who took the time to repair inadequate sheathing before going forward with roof repair or installation.

4. Clean Job Site

As the contractor performs the roofing replacement, take notice of the surrounding job site. While it’s nearly impossible for a job site to remain completely spotless, professional contractors will do their best to keep your landscape clean and intact throughout the process here in The Villages. Tarps or cardboard sheets may be used to protect your lawn from abuse. Professional contractors will also pick up any excess materials such as roofing scraps and loose nails from your yard. A trailer should be brought onto the jobsite to ensure that no leftover nails, shingles, or other materials are left behind.

5. Strategically Placed Nails

Roof repair isn’t as simple as nailing in a few shingles. An experienced contractor knows that nails must be strategically placed to prevent them from becoming loose or blowing off. Most manufacturers also require shingles to be nailed a certain way to qualify for a warranty. When a shingle isn’t nailed properly, it can leave the nail exposed leading to staining and eventually leaks.
Contractors who use pneumatic nail guns must also make sure that each nail is set to the proper depth. In some instances, nails may need to be driven in by hand. Make sure your contractor takes the time to get each and every nail placement just right and doesn’t just run through the job to get the shingles anchored as quickly as possible.

6. Correct Shingle Installation

Asphalt Laminate shingles are one of the most commonly used roofing materials here in The Villages. While widely used, some contractors fail to correctly install these shingles, increasing the risk of cracks, leakage, and other issues. Even small problems such as not having enough overlap between shingle columns can cause major damage down the road.
One of the easiest ways to spot a subpar roofing job is by looking at how the shingles align. The cutouts on Architectural shingles should be vertical and the butted joints should be on the same horizontal plane.

7. Attention To The Details

When trying to determine if your contractor did quality roof work, look at the details. Start with the flashing which protects your roof from leaks. Flashing is typically made from steel or aluminum and should be installed at all wall intersections, as well as around chimneys and skylights. Some contractors may choose putty or tar instead of flashing, but this method can lead to cracks and leaks. Also take notice of other small details such as the drip edge. Drip edges are typically made of galvanized steel and should extend just over the gutter to keep water flowing down the roof, into the gutter, and away from the house.

Quality Roofing Work – Worth the Wait

You don’t want a contractor who is going to cut corners to save money. When it comes to roof repair or new roofing installation, you want a contractor who is going to deliver quality work at a fair price and takes the time to do it right like Skylight Roofing Villages.

State Licensing Skylight Roofing
CGC1529262 / CCC1332541

Trusted because our loving Villages neighbors voted Skylight Roofing Villages the “Favorite Roofer in The Villages” in 2022. We have humbly looked to achieve that same goal for best price and quality in 2023.

352-552-4766 or 407-790-6755

The Villages - Skylight Roofing Inc.

Skylight Roofing

Sky Light Roofing, Inc. - Lady Lake, FL - Nextdoor

Sky Light Roofing Inc. Reviews | Read Customer Service Reviews of skylightroofing.com

Sky Light Roofing, INC | Roofing Contractor | Owens Corning

https://www.bbb.org/us/fl/orlando/pr...-0733-90201209 A+ Rated

Sky Light Roofing, Inc. - Nextdoor https://nextdoor.com/pages/sky-light...urce=org_pages