Talk of The Villages Florida - Rentals, Entertainment & More
Talk of The Villages Florida - Rentals, Entertainment & More
|
|
||
|
||
![]()
Type 410 stainless has iron in it and it will rust. Not all stainless is stainless so to speak.
|
|
||
|
||
![]()
Maybe try this first… Removal of oxidized stains and even “surface rust” can be done by using a paste made from baking soda and water or a cleaner that contains oxalic acid, such as Bar Keepers Friend Soft Cleanser. If using baking soda and water, use a cloth or soft bristle brush to rub the baking soda paste in the direction of the grain.
|
|
||
|
||
![]()
You don't actually wind up with a completely new door. The "skins" can be replaced. We had it done under warrranty.
|
|
||
|
||
![]() Quote:
You may be able to buy an aftermarket decorative skin that may hide the rust. They sell them on Amazon. But, I think that any attempt to remove the rust with a chemical rubbing compound will just make the door look worse. It's not possible to match the factory finish on stainless steel. Last edited by retiredguy123; 04-12-2023 at 06:57 AM. |
|
||
|
||
![]()
My 9 year old Whirlpool side-by-side with freezer pull-out below (what The Villages was installing back then) had new skins installed on side-by-side doors. It was surprising how fast it was done.
|
|
||
|
||
![]()
I got a metal roof that is galvalume I am told (5V). The open roof areas are clean of rust after 20 years. Now some of the peak is rusted solid. Roofer tells me some of peak is galvanized only and some galvalume.
Also have rusting on the good flat sloped surface of galvalume. That's due to solar panel aluminum frames. Rain drops carry aluminum oxide from the frame and THAT will rust the good galvalume sheets. Cannot believe that was allowed 11 years ago. |
|
|
Thread Tools | |
|