[kittylecroix]

Has anyone had a pergula constructed, and if so, could you recommend someone to do one?

[kb8tpw]

I am still in the procrastination mode. I have had estimates from Magellan, White Aluminum and Ehmann Const in Summerfield and another that escapes my memory. I originally intended to start the first of the year, and have yet to do so. I have several considerations as to placement and size that I have not resolved. It will be associated with a corner of my house and compliment a water feature, but all the various estimate options, such as material (alum, wood or vinyl) ground surface (cement, sod, pavers) are still in question. I will probably (there goes my procrastination again) decide and start by midf-summer. We think they are a wonderful enhancement to a house.

[JenAjd]

Originally Posted by kb8tpw

I am still in the procrastination mode. I have had estimates from Magellan, White Aluminum and Ehmann Const in Summerfield and another that escapes my memory. I originally intended to start the first of the year, and have yet to do so. I have several considerations as to placement and size that I have not resolved. It will be associated with a corner of my house and compliment a water feature, but all the various estimate options, such as material (alum, wood or vinyl) ground surface (cement, sod, pavers) are still in question. I will probably (there goes my procrastination again) decide and start by midf-summer. We think they are a wonderful enhancement to a house.

I would love one of those as well! What are the estimated costs of one?? I haven't yet pursued it but would love one in the front (if the "powers that be" would allow it).

[mulligan]

The only real stipulation I have read in the covenants is that it must be attached to the house.

[graciegirl]

Originally Posted by mulligan

The only real stipulation I have read in the covenants is that it must be attached to the house.

I think you must be right. There are two, maybe three on south Odell, north side, (They back to Odell) maybe you could stop and ask them who did theirs.

[ijusluvit]

We have a beautiful, free standing 10x12'x8' high pergola, totally maintenance free, powder-coated aluminum, sitting on a concrete pad. It cost $700 as a kit from a discount retailer (BJs). I was able to assemble it with a socket wrench, a step ladder and my wife steadying the legs as I connected the first roof pieces. Nothing heavy or strenuous. Completed in less than four hours. The 12x12 concrete pad was under a hot tub the previous owner had in a private side yard of our CYV. I finished it with ceramic tile.

The pergola is a perfect addition, and still looks new four years later. I searched the internet extensively. Vinyl and cedar pergolas are more expensive. If you'd like to see a photo, send me a PM with your email address.

[kb8tpw]

Prices are per square foot, so indicating "what does one cost" is a varible answer. Yes, they do have to be attached to the house. And they do require submission to Architectural Review. My research convinced me that aluminum is the best bet. My landscaper got me in the pergola mood and wanted to include one in my original design and had a top notch carpenter to do so, but I did not want to go with wood. The do it yourself, with a kit, is certainly a good option and it is my guess that having a contractor do that would double the price, plus cost of surface. Get on the internet and spend a few hours to become familar with what is out there before you contact anyone. It is always nice to be knowledgable of what it is you want and there are many many options. I probably saved 50 - 60 pictures of pergolas to my computer for later review and comparisons. I am actually surprised they are not more popular, especially since The Villages use them in their infrastructure around the property.

[JenAjd]

If we do one it would be DIY I think they're attractive! For us, it would possibly screen the hot sun from mid-day to sunset. Have to convince the spouse though, that we should do it. Cost would be a factor...but I personally like the wood look. All this to be determined!

[bkcunningham1]

ijusluvit, the wind doesn't bother your pergola? Or are the legs in footings in the ground?

[Ohiogirl]

We would like to put one on the east side of our our CYV, basing it on the existing patio. Jusluvit, is that a strong enough base? Not sure how thick that is, but once back in TV, could dig down and find out.

Up north, of course, you have to worry about the frost depth - footings needed to be 4 feet deep in WI if I'm remembering correctly, but less in central Ohio. In Florida, probably just need to make sure the base is strong (thick) enough to support the weight?

I'd be interested in getting a contractor to either do the kit for us, or do something similar, depending on cost.

[wendyquat]

Originally Posted by kb8tpw

I am still in the procrastination mode. I have had estimates from Magellan, White Aluminum and Ehmann Const in Summerfield and another that escapes my memory. I originally intended to start the first of the year, and have yet to do so. I have several considerations as to placement and size that I have not resolved. It will be associated with a corner of my house and compliment a water feature, but all the various estimate options, such as material (alum, wood or vinyl) ground surface (cement, sod, pavers) are still in question. I will probably (there goes my procrastination again) decide and start by midf-summer. We think they are a wonderful enhancement to a house.

Did you ever start the pergola?

[tainsley]

Originally Posted by ijusluvit

We have a beautiful, free standing 10x12'x8' high pergola, totally maintenance free, powder-coated aluminum, sitting on a concrete pad. It cost $700 as a kit from a discount retailer (BJs). I was able to assemble it with a socket wrench, a step ladder and my wife steadying the legs as I connected the first roof pieces. Nothing heavy or strenuous. Completed in less than four hours. The 12x12 concrete pad was under a hot tub the previous owner had in a private side yard of our CYV. I finished it with ceramic tile.

The pergola is a perfect addition, and still looks new four years later. I searched the internet extensively. Vinyl and cedar pergolas are more expensive. If you'd like to see a photo, send me a PM with your email address.

I was up at Sam's (in VA) yesterday and they had one on display for $399.00. It was cedar and you have to assemble it yourself. I am sending you a PM as we are also interested in putting one in yard just as soon as we get there!

[faithfulfrank]

I plan on installing one in an inside corner on the back of our home. It will be about 9x12. I will do it myself, as I do everything myself.

I will definitely go with powder coated Aluminum. At 53 years old I am at a time in my life where my goal is to do things right the first time and do it in a way where there is minimum or no long term maintenance.

Cedar might look nice new, but it would need a very labor intensive restaining/resealing every two years or so to keep it that way. I strongly prefer not to have to do that.

Frank

[kb8tpw]

Construction is to start this Mon (Oct 3) and being done by Magellan Constr. They advertiswe as The Pergola Kings. My landscaping pros, Villages Palms is going to top it off with pavers for base ande a walk to back door as well as adjoining additional landscaping. Probably be 3 weeks befor it is totally finished. I'll attach a photo when finishe3d off by both contractors.

[wendyquat]

Originally Posted by kb8tpw

Construction is to start this Mon (Oct 3) and being done by Magellan Constr. They advertiswe as The Pergola Kings. My landscaping pros, Villages Palms is going to top it off with pavers for base ande a walk to back door as well as adjoining additional landscaping. Probably be 3 weeks befor it is totally finished. I'll attach a photo when finishe3d off by both contractors.

Would you share the size, material and what price you got? Thanks